The EOTech DCBL 9PCC 9mm Titanium Suppressor in Black is a 3D-printed Grade 5 titanium can for a 9mm pistol-caliber carbine (EOTech part no. EOT-DCBL-9CC-MB). EOTech built the DCBL line around a vent-forward design that sends gas forward and away from the shooter, cutting back pressure and blowback for cleaner cycling on a semi-auto host. The suppressor body is 7 inches long and weighs 9.3 ounces, and EOTech also publishes the working figures with the hub or flash hider fitted: 7.3 inches and 13.9 ounces. It mounts on the standard 1.375-24 HUB thread, so it works with common HUB mounts and adapters. This version carries a black high-temperature Cerakote finish.

Key Specifications

• EOTech lists the maximum caliber as 8.6 Blackout, the largest cartridge rated for this model.
• Bore diameter is 0.4 inch, the opening the bullet passes through.
• The suppressor body is 7 inches long before the hub or flash hider is added.
• Installed length with the hub or flash hider is 7.3 inches, the figure to plan around on your rifle.
• Overall diameter is 1.6 inches, so check handguard and optic clearance before mounting.
• The body alone weighs 9.3 ounces.
• Installed weight with the hub or flash hider is 13.9 ounces, the real weight added at the muzzle.
• Construction is 3D-printed Grade 5 titanium, which allows baffle shapes that conventional machining cannot produce.
• The finish is black high-temperature Cerakote, a coating that stands up to suppressor heat.
• Mounting uses the 1.375-24 HUB thread, the industry-standard pattern shared across the DCBL line.

Frequently Asked Questions

Can I run the DCBL 9PCC on a handgun? EOTech says shooting the 9PCC on handguns is not the intent of the design and is not suggested, because pistols often need a booster assembly for their tilt-barrel function.

Do I need ATF approval to buy this? No. As of October 9, 2026, ATF no longer requires Form 4 approval, registration or a tax stamp for suppressors. It transfers on a Form 4473 with a background check through a Class 3 (SOT) dealer. State and local laws still apply.

Is the DCBL 9PCC full-auto rated, and what barrel length does it need? EOTech lists the DCBL 9PCC as not full-auto rated, with a 10.3-inch minimum barrel length that applies only when shooting rifle cartridges.

Buy the EOTech DCBL 9PCC 9mm Titanium Suppressor, Black

As of October 9, 2026, this suppressor transfers on a Form 4473 with a background check at your Class 3 (SOT) dealer, with no Form 4 or tax stamp; state and local laws still apply. Order through EOTech‘s silencers and suppressed firearms lineup and our Lubbock, Texas team will handle the transfer.