The YHM Universal Rifle Suppressor Mount in 1/2×36 is a direct thread mount from Yankee Hill Machine for suppressors that use the 1.375×24 HUB interface. YHM designed it to convert existing suppressors from other manufacturers so they thread straight onto your barrel, which makes it a practical way to run a HUB-compatible suppressor on a rifle with a 1/2×36 muzzle. Installation is simple: remove the existing mount from the suppressor, thread this one on with a 3/4-inch open-end wrench, then thread the suppressor onto the barrel. It is machined from heat-treated 17-4PH stainless steel and finished in black Melonite QPQ.

Key Specifications

• The barrel thread pattern is 1/2×36, which is the pitch your muzzle needs for this version of the mount.
• The suppressor side uses a 1.375×24 HUB mounting thread, the interface that lets a HUB-compatible suppressor accept the mount.
• Material is heat-treated 17-4PH stainless steel, a strong grade that holds up to repeated threading.
• The finish is black Melonite QPQ, a surface treatment that resists wear and corrosion.
• Weight is 1.7 ounces, so the mount adds very little to the suppressor.

Frequently Asked Questions

Which barrel thread does this mount use? This version uses a 1/2×36 thread pattern. YHM also offers the universal mount in other thread sizes, so the 1/2×36 designation is the one to match to your barrel.

Can it be used with suppressors from other manufacturers? Yes. YHM designed the Universal Rifle Suppressor Mount to convert existing suppressors from other manufacturers to direct thread mounting, and the suppressor side is the 1.375×24 HUB interface.

Buy the YHM Universal Rifle Suppressor Mount, 1/2×36

A direct thread mount takes a part out of the suppressor setup, and this one is sized specifically for 1/2×36 barrels. Order it from our Lubbock, Texas gun shop for fast, direct shipping, and see more suppressor parts and accessories for your rifle.