The B&T Print-X VERS36 Ti Modular Suppressor, Rated to .360, is a modular, multi-caliber titanium suppressor from B&T. B&T makes it from 3D-printed titanium with its Reduced Back Pressure System design, and the two-piece layout lets you remove the front section for a shorter, lighter setup. It ships with 1/2×28 and 5/8×24 direct thread adapters and with .36 caliber and 5.56 end caps, and it is compatible with HUB-style mounts. It suits a shooter who wants one hard-use suppressor to move between several hosts rather than one can per caliber.

Key Specifications

• The caliber rating is up to .360, and B&T extends it through .338 LPM and 350 Legend for a true multi-caliber can.
• Weight is 7.4 to 11.3 ounces depending on configuration, light for a rifle suppressor.
• Length is 4.9 to 6.9 inches between the short and long configurations, so the can can be matched to the host.
• The body is 3D-printed titanium with B&T’s Reduced Back Pressure System design.
• The finish is black Type 2 anodizing, which B&T says reduces sparking.

Frequently Asked Questions

Which cartridges and barrel lengths does it cover? B&T lists .223 Rem and 5.56 NATO on barrels down to 10 inches, .308 Win and 7.62 NATO down to 16 inches, .300 Win Mag down to 20 inches and .338 Lapua Magnum down to 18 inches, with ratings up to .338 LPM and 350 Legend.

Do I need ATF approval to buy this? No. As of October 9, 2026, ATF no longer requires Form 4 approval, registration or a tax stamp for suppressors. It transfers on a Form 4473 with a background check through a Class 3 (SOT) dealer. State and local laws still apply.

Buy the B&T Print-X VERS36 Ti Modular Suppressor, Rated to .360

As of October 9, 2026, this suppressor transfers on a Form 4473 with a background check at your Class 3 (SOT) dealer, with no Form 4 or tax stamp; state and local laws still apply. Order through B&T‘s suppressors lineup and our Lubbock, Texas team will handle the transfer and it ships fast to your Class 3 dealer.