The B&T VERS36 Ti suppressor (B&T part no. SD-VERS36) is a modular, multi-caliber can rated up to .360 and printed from 100 percent titanium by laser bed fusion. Its two-piece body lets you remove the front section for a shorter, lighter setup, and B&T rates both configurations full-auto. The maker lists ratings up to .338 Lapua Magnum and 350 Legend, with 5.56 NATO cleared on barrels down to 10 inches and .308 Winchester on barrels down to 16 inches. Direct thread adapters in 1/2×28 and 5/8×24 ship in the box along with .36 caliber and 5.56 end caps, so one can covers pistol, carbine and rifle hosts. This is the gray Type 2 anodized model.

Key Specifications

• The caliber rating is up to .360, which takes in most pistol and rifle bores below that ceiling.
• Weight is 7.4 to 11.3 ounces, depending on whether the front section is installed.
• Length is 4.9 to 6.9 inches, short for handling or longer for more suppression.
• The diameter is 1.7 inches, a common rifle-can width that clears most handguards.
• Construction is 100 percent titanium by laser bed fusion, the lightest material B&T offers in a modular can.
• The finish is gray Type 2 anodizing over the titanium body.
• Mounting is compatible with all HUB-style mounts, so the can moves between hosts on standard mounts.
• It ships with 1/2×28 and 5/8×24 direct thread adapters, the two most common pistol and rifle muzzle threads.
• Included end caps are .36 caliber and 5.56, letting you match the bore to the cartridge on the host.
• Durability testing includes 6 passed cycles of the SOCOM reliability test, where one cycle is eight 30-round magazines.

Frequently Asked Questions

What barrel lengths is it rated for? B&T lists 5.56 NATO on barrels down to 10 inches, .308 Winchester down to 16 inches, .300 Win Mag down to 20 inches and .338 Lapua Magnum down to 18 inches. The maker notes that barrels under 10 inches may see higher than normal erosion at high rates of fire over time.

Can I run it shorter? Yes. Remove the front section for the short, lighter configuration. B&T rates both lengths full-auto.

Do I need ATF approval to buy this? No. As of October 9, 2026, ATF no longer requires Form 4 approval, registration or a tax stamp for suppressors. It transfers on a Form 4473 with a background check through a Class 3 (SOT) dealer. State and local laws still apply.

Buy the B&T VERS36 Ti Modular Suppressor, Rated to .360, Gray

As of October 9, 2026, this suppressor transfers on a Form 4473 with a background check at your Class 3 (SOT) dealer, with no Form 4 or tax stamp; state and local laws still apply. Order through B&T‘s suppressors lineup and our Lubbock, Texas team will handle the transfer, and it ships fast to your Class 3 dealer.