The B&T TiGER22 Ti .22 LR suppressor (B&T part no. SD-TiGer22-Ti) is a 3D-printed titanium rimfire can that weighs just 4 ounces. B&T prints the body weldless from titanium and threads it 1/2×28, so it spins straight onto the standard rimfire muzzle thread without an adapter. Beyond .22 LR, the maker lists it for .22 Magnum, 5.7x28mm and bolt-action .223, which lets one light can move between a trainer, a plinking pistol and a small-game rifle. At 5.1 inches long and 1.2 inches across, it barely changes how a rimfire gun balances. It is made in the USA and carries a B&T lifetime limited warranty.

Key Specifications

• The caliber rating is .22 LR, with .223 in bolt-action rifles only, the exact limit B&T publishes for this can.
• Multi-caliber use extends to .22 Magnum and 5.7x28mm, per B&T’s own list of supported platforms.
• Weight is 4 ounces, light enough that a rimfire pistol stays easy to hold on target.
• Overall length is 5.1 inches (130 mm), compact for a trainer rifle or a suppressed range pistol.
• The diameter is 1.2 inches (30 mm), a slim tube that stays under most rimfire sight lines.
• Construction is 3D-printed weldless titanium, strong and corrosion resistant at very low weight.
• The thread pitch is 1/2×28, the standard rimfire muzzle thread.
• Attachment is direct thread, so the can screws straight onto a threaded barrel with no separate mount.
• The finish is gray Type 2 anodizing, a hard surface layer over the titanium.
• The design is user serviceable, so the lead and carbon a rimfire can collects can be cleaned out at home.

Frequently Asked Questions

Can I run it on a .223 rifle? Only a bolt-action one. B&T rates the TiGER22 Ti for .22 LR with .223 limited to bolt-action rifles, and it also lists .22 Magnum and 5.7x28mm among the platforms the can supports.

Can I clean it myself? Yes. B&T describes the TiGER22 Ti as user serviceable, which matters on a rimfire can because .22 LR fouls a suppressor far faster than most centerfire loads.

Do I need ATF approval to buy this? No. As of October 9, 2026, ATF no longer requires Form 4 approval, registration or a tax stamp for suppressors. It transfers on a Form 4473 with a background check through a Class 3 (SOT) dealer. State and local laws still apply.

Buy the B&T TiGER22 Ti .22 LR Suppressor, Titanium Gray

As of October 9, 2026, this suppressor transfers on a Form 4473 with a background check at your Class 3 (SOT) dealer, with no Form 4 or tax stamp; state and local laws still apply. Order through B&T‘s suppressors lineup and our Lubbock, Texas team will handle the transfer, and it ships fast to your Class 3 dealer.