The Rugged Micro30 is a modular .30-caliber rifle suppressor designed for situations where length takes priority (Rugged part no. MIC01762). In its 5-inch short configuration it adds less than 3.5 inches past the muzzle device, and the ADAPT module goes on in seconds when you want more suppression. Rugged Suppressors machines it from 17-4 PH stainless steel barstock with full-circumference welded Cobalt 6 baffles, and rates it Belt Fed with no barrel length restrictions for center-fire rifle calibers up to .300 RUM. It mounts through the quick-detach Dual Taper Locking System and ships with a 5/8×24 M2 brake. It suits a short rifle that has to run hard, suppressed or not.

Key Specifications

• The caliber rating is center-fire rifle up to .300 RUM, from 5.56 through .30-caliber magnums.
• It is Belt Fed Rated with no barrel length restrictions, so it can live on the shortest barrel you run.
• Standard configuration length is 6.5 inches with the ADAPT module installed.
• Short configuration length is 5 inches, which Rugged calls the shortest .30 cal suppressor on the market.
• Weight is 15.1 ounces standard and 11.8 ounces short.
• Diameter is 1.5 inches, slim for a belt fed rated can.
• Baffles are Cobalt 6, chosen for heat and abrasion resistance.
• The tube and monolithic mount are 17-4 PH stainless steel, finished in black Cerakote.
• Mounting is the quick detach Dual Taper Locking System, with a 5/8×24 M2 brake included.
• Front caps are interchangeable, with a 7.62mm cap included and a 5.56mm cap available.

Frequently Asked Questions

What thread does the Micro30 use? Rugged lists a 5/8×24 thread pitch, and the suppressor ships with an M2 brake in 5/8×24 that it locks onto through the Dual Taper Locking System.

Do I need ATF approval to buy this? No. As of October 9, 2026, ATF no longer requires Form 4 approval, registration or a tax stamp for suppressors. It transfers on a Form 4473 with a background check through a Class 3 (SOT) dealer. State and local laws still apply.

What is the ADAPT module? It is the front section that converts the Micro30 from its 5-inch short configuration to its 6.5-inch standard configuration for more suppression, and it is included in the box.

Buy the Rugged Suppressors Micro30 Modular .30 Cal Rifle Suppressor, Black

As of October 9, 2026, this suppressor transfers on a Form 4473 with a background check at your Class 3 (SOT) dealer, with no Form 4 or tax stamp; state and local laws still apply. Order through Rugged Suppressors‘s silencers and suppressed firearms lineup and our Lubbock, Texas team will handle the transfer, and it ships fast to your Class 3 dealer.