The Talley Low 1-Inch Ring/Base Combo for Winchester XPR (brand part no. 930765) is a one-piece Talley Winchester XPR scope mount for 1-inch scope tubes. Talley fully CNC machines the combined base and rings from lightweight aircraft-grade aluminum, so there is no separate base to align. The low height keeps a 1-inch scope close to the receiver. It needs no lapping and is made to fit the Winchester XPR right out of the box.

Key Specifications

• The mount takes a 1-inch scope tube, which fits the common 1-inch main-tube scopes.
• The ring height is low, which keeps the scope close to the receiver.
• Front height is 0.400 inch and rear height is 0.504 inch, measured from the top of the receiver to the bottom of the scope tube.
• It is built for the Winchester XPR, so it matches that receiver without fitting.
• The ring and base are one piece, which removes the alignment problems of two-piece mounts.
• It is fully CNC machined from aircraft-grade aluminum for strength with light weight.
• It weighs 2.0 ounces per set, so it adds little to the rifle.
• Hole spacing is 0.860 inch front and rear, center to center.
• It mounts with 8-40 x 1/4-inch screws and a T-15 driver, and the screws and wrench are included.
• No lapping is required, so it is ready to mount as shipped.

Frequently Asked Questions

What rifle is this mount made for? It is made for the Winchester XPR. Talley sells the same one-piece design for the XPR in other heights and in a 30mm tube size.

Do I need a separate scope base? No. The base and rings are a single piece, and the screws and wrench are included.

How do I choose the ring height? Stack shims such as coins or washers to the height your scope needs and measure the stack. Make sure the final height clears the bolt handle.

Buy the Talley Low 1-Inch Ring/Base Combo for Winchester XPR

Mount a 1-inch scope low on your XPR with a one-piece combo that needs no lapping. Order it from our Talley lineup, part of our scope accessories selection, at our Lubbock, Texas gun shop for fast, direct shipping.