The EGW Picatinny scope base for the Winchester 1300 and SXP (Super X Pump), EGW part no. 42500, is a one-piece 0 MOA rail that gives these pump shotguns a proper optics platform. EGW machines it in the USA from 6061 T6 extruded aluminum and finishes it in matte black Type II anodizing. Cross slots run the full length of the rail, so rings and other accessories can sit where you need them, and the channel down the center cuts weight. Mounting hardware is included, so it installs with the screws and bit in the box.

Key Specifications

• It fits the Winchester 1300 and Winchester SXP (Super X Pump), the two pump shotguns EGW lists for this base.
• The rail is a one-piece Picatinny design with cross slots along its full length, so rings can go wherever the optic needs them.
• It is machined from domestic 6061 T6 extruded aluminum, a light, strong material for a receiver mount.
• The finish is matte black Type II anodizing, which resists wear and glare.
• Overall length is 6.276 inches, with a center spread of 2.49 inches that matches the receiver screw holes.
• Height is 0.4 inch from the top of the receiver to the top of the Picatinny rail, keeping the optic low.
• Weight is 2 ounces, so the base adds very little to the shotgun.
• Hardware is included: #6-48 x 1/4 screws and a T-10 bit, with a recommended torque of 20 inch-pounds.

Frequently Asked Questions

Which shotguns does this base fit? EGW lists the Winchester 1300 and the Winchester SXP (Super X Pump), and recommends measuring your receiver hole spacing against the published dimensions before installing.

Is the mounting hardware included? Yes. It ships with #6-48 x 1/4 screws and a T-10 bit, and EGW recommends 20 inch-pounds of torque with a drop of blue Loctite.

Is this a 0 MOA or 20 MOA base? This one is 0 MOA. EGW suggests 0 MOA for shooting out to 500 yards.

Buy the EGW Picatinny Scope Base for Winchester 1300 and SXP

A pump shotgun does its best work with a sturdy, low optic mount, and this base is built for the 1300 and SXP receivers. The mount and its hardware are made in the USA. Order from EGW‘s selection of scope accessories and parts through our Lubbock, Texas gun shop for fast shipping.