The EGW Savage B-Mag Picatinny scope base is a one-piece 0 MOA rail made specifically for the Savage B-Mag rimfire rifle (EGW part no. 41970). EGW machines it in its own shop from 6061 aluminum, tumbles and sand blasts it, and Type II anodizes it in matte black. Picatinny cross slots run the full length, so scope rings and other accessories can go wherever you need them. Mounting hardware and a T-10 bit are included, so the base is ready to install out of the box.

Key Specifications

• It is made for the Savage B-Mag, with hole spacing matched to that receiver.
• The rail type is one-piece Picatinny, with cross slots that run the full length of the rail.
• The base is 0 MOA, which EGW recommends for shooting from 0 to 150 yards.
• It is machined from domestic 6061 T6 extruded aluminum, a light and strong alloy.
• The finish is matte black Type II anodize, applied after tumbling and sand blasting.
• The center spread is 3.195 inches, the hole spacing to check against your receiver.
• The overall length is 5.882 inches, long enough to carry rings and optics with room to adjust.
• The height is 0.4 inches from the top of the receiver to the top of the Picatinny rail.
• The weight is 2 ounces, which keeps the rifle light.
• Hardware is #6-48 x 1/4-inch screws and a T-10 bit, torqued to 20 inch-pounds with a drop of blue Loctite.

Frequently Asked Questions

Does this base fit other Savage rifles? No. EGW makes it for the Savage B-Mag, and it has an ejection port cut-out on the right side. EGW recommends measuring the hole spacing in your receiver against its published dimensions to confirm the match.

Is the base ambidextrous or quick-detach compatible? No. It is not ambidextrous and it is not compatible with quick-disconnect rings.

Does it come with screws? Yes. Mounting hardware (#6-48 x 1/4-inch screws) and a T-10 bit are included. EGW recommends 20 inch-pounds of torque and a drop of blue Loctite.

Buy the EGW Savage B-Mag Picatinny Scope Base, 0 MOA

For a B-Mag that needs a rail for a scope or a red dot, this is a clean, made-in-the-USA way to do it. Order it from our Lubbock, Texas gun shop for fast, insured shipping to your door, and see more scope accessories while you are here.