Warne Tikka Scope Rings – 30mm High, Matte Black, Steel

Warne’s Tikka Scope Rings (brand part no. 15TM) are machined specifically to fit right onto a Tikka receiver’s dovetail, so no separate mounting base is needed. A Tikka-specific recoil pin engages the receiver for positive, no-slip holding power, and the rings permanently attach to the base once installed. Warne machines the rings from steel and secures the scope with 4 Torx T-15 socket cap screws, torqued to a recommended 25 in-lb for a consistent, repeatable mount. This set is sized for a 30mm scope tube in a high height, giving extra clearance over a large objective bell or the receiver itself, finished in matte black to cut glare in the field. It’s a precise, purpose-built mounting solution for any Tikka rifle owner who wants to skip a separate base.

Key Specifications

• Machined specifically for the Tikka receiver dovetail.
• Mounts directly to the receiver, no separate base needed.
• Uses a Tikka-specific recoil pin for positive engagement.
• Permanently attaches to the base once installed.
• Secured with 4 Torx T-15 socket cap screws.
• Recommended torque of 25 in-lb for the mounting screws.
• Sized for a 30mm scope tube.
• Built to a high ring height for extra clearance.
• Machined from steel, finished in matte black.

Frequently Asked Questions

Why choose the high height? It gives a 30mm scope extra clearance over a large objective bell or the receiver.

Do I need a separate base? No, these mount directly to the Tikka receiver’s dovetail.

What torque should I use on the screws? Warne recommends 25 in-lb on the 4 Torx T-15 socket cap screws.

Buy the Warne Tikka Scope Rings – 30mm High, Matte Black, Steel

Mount your 30mm scope directly to your Tikka’s receiver, no base required. Order the Warne Tikka rings from our scope rings selection at our Lubbock, Texas gun shop for fast, direct shipping.