The RPM CLR-34100 Precision 34mm Medium Scope Rings (brand part no. CLR-34100) build a bubble level directly into the ring body, so you can check your scope’s cant from the shooting position with your non-dominant eye without reaching for a separate ring level. Ruffs Precision machines the rings from 6061-T6 aluminum with a 303 stainless steel cross bolt and nut, and an alignment lug keeps the cap and base perfectly registered during installation so the scope sits true. At a 1.00-inch center height, these Medium rings suit a 34mm-tube scope mounted low on a standard-height receiver. Among our scope rings, the CLR-34100 suits precision rifle shooters who want a built-in cant reference without adding a separate leveling accessory to the rig.

Key Specifications

• The ring tube diameter is 34mm.
• The ring height is Medium, 1.00 inches to the center of the optic.
• The rings feature an integrated bubble level visible from the shooting position.
• The construction is 6061-T6 aluminum ring body and cap.
• The cross bolt is 303 stainless steel, 1/2-inch.
• An alignment lug keeps the cap and base registered during installation.
• The recommended cap screw torque is 18 in-lbs, and the cross bolt torque is 45 in-lbs.
• The weight is 4.4 ounces for the Medium height.
• The rings are made in the USA.

Frequently Asked Questions

Can I see the bubble level while shooting? Yes, it’s positioned to be visible from the shooting position with your non-dominant eye for a quick cant check before the shot.

What torque should I use to install these? RPM recommends 18 in-lbs on the cap screws and 45 in-lbs on the cross bolt.

What tube diameter and height do these rings use? A 34mm tube diameter at Medium height, 1.00 inch to the center of the optic.

Buy the RPM CLR-34100 Precision 34mm Scope Rings

A precision-machined 34mm ring set with a genuinely useful built-in cant reference, the CLR-34100 saves you the hassle of a separate leveling tool at the range. Order it from our Lubbock, Texas gun shop for fast shipping.