The RCBS Full-Length Die Set, Group D, for 6.5x68S (RCBS part no. 27901) is a two-die set built for reloading bottleneck rifle cases to SAAMI-minimum dimensions. The Full-Length Sizer Die, with its integrated Expander-Decapping Unit, sizes the outside of the case, removes the spent primer, and expands the neck to accept a new bullet, while vents in the die prevent case damage from trapped air or excess lubricant. The included Seater Die, fitted with a Bullet Seater Plug, seats the bullet and applies a built-in roll crimp in the same step, giving 6.5x68S handloaders a complete two-die solution from a single set.

Key Specifications

• The Full-Length Sizer Die brings the case to SAAMI-minimum cartridge dimensions.
• An integrated Expander-Decapping Unit removes the spent primer and expands the case neck to accept a new bullet.
• Vents in the sizer die prevent case damage caused by trapped air or excess lubricant.
• The Seater Die includes a built-in roll crimper to secure the bullet as it’s seated.
• Headspace is held to minimum tolerances so case body length stays consistent during full-length sizing.

Frequently Asked Questions

What does the Expander-Decapping Unit do? It removes the spent primer and expands the case neck to the correct diameter to accept a new bullet, all in the same sizing step.

Does the seater die crimp the bullet? Yes, the Seater Die has a built-in roll crimper that secures the bullet at the same time it’s seated.

Buy the RCBS Full-Length Die Set, Group D, 6.5x68S

This two-die set covers sizing and seating for 6.5x68S bottleneck brass from a single box. Order it from our Lubbock, Texas gun shop, where our gunsmithing tools selection stocks full-length die sets for bottleneck and straight-wall cartridges alike, with fast shipping to your door.