The RCBS Full-Length 2-Die Set for 7mm PRC (RCBS part no. 28101) gives bottleneck-case handloaders everything needed to size and seat in one box. RCBS builds this set around a Full-Length Sizer Die with an Expander-Decapping Unit, which brings fired brass to SAAMI minimum dimensions, sizes the case exterior, deprimes, and expands the neck to accept a bullet, plus a Seater Die with a built-in roll crimper that secures the bullet at the same time it’s seated.

Key Specifications

• Full-Length Sizer Die with Expander-Decapping Unit brings 7mm PRC brass to SAAMI minimum dimensions in one pass.
• Case deprime and neck expansion happen in the same sizing step, saving a separate operation.
• Vented die body prevents case damage from trapped air or excess lubricant during sizing.
• Minimum-tolerance headspace control avoids changing case body length during full-length sizing.
• Seater Die with built-in roll crimper secures the bullet at the same time it’s seated.
• Two-die set configuration covers the full sizing and seating workflow for 7mm PRC in one box.
• Bullet Seater Plug included with the Seater Die seats bullets to a consistent, repeatable depth.
• Bottleneck cartridge case compatibility is what this two-die set is purpose-built for.
• Case lubricant required for full-length sizing, standard practice with bottleneck rifle brass.

Frequently Asked Questions

What does the Full-Length Sizer Die do? It sizes the outside of the case to SAAMI minimum dimensions, deprimes the case, and expands the neck to accept a new bullet, all in one die.

Does the seater die crimp the bullet? Yes, the included Seater Die has a built-in roll crimper that secures the bullet at the same time it is seated.

What cartridge is this die set built for? This set is built specifically for 7mm PRC.

Buy the RCBS Full-Length 2-Die Set, 7mm PRC

Stock the bench for 7mm PRC handloading. Order the reloading dies from our Lubbock, Texas gun shop and get a complete two-die setup in one box.