The Leupold BackCountry Winchester XPR ringmounts (brand part no. 177142) attach directly to a Winchester XPR receiver with no separate base, holding any riflescope with a 1-inch main tube at medium height. Leupold machines every BackCountry mount from 7075-T6 aluminum, which is why the pair weighs only 3.2 ounces while ranking among the company’s most rugged mounts. The medium rings sit 1.06 inches high, enough clearance for the objective bells common on 1-inch hunting scopes without pushing the scope above a natural cheek weld. Leupold specifies 22 inch-pounds on the receiver screws and 28 inch-pounds on the ring tops, and backs the mounts with its lifetime guarantee. The matte finish matches a blued or black synthetic XPR, and the two-piece design keeps the action open for loading. For an XPR owner mounting a 1-inch scope, it is a direct-attach mount that Leupold counts among its lightest and most rugged.

Key Specifications

• The mount fits the Winchester XPR and attaches directly to the receiver without a separate base.
• Ring diameter is 1 inch, for riflescopes with a 1-inch main tube.
• Ring height is medium, 1.06 inches, measured from the receiver to the center of the ring.
• The material is 7075-T6 aluminum, a stronger alloy than the 6061 used in most aluminum rings.
• Weight is 3.2 ounces for the pair, among the lightest in Leupold’s line.
• The finish is matte, matching a blued barrel and black synthetic stock.
• It is a two-piece design, which leaves the ejection port open for loading and unloading.
• There is no base cant, so the scope sits level for normal hunting distances.
• Leupold specifies 22 inch-pounds on the receiver screws and 28 inch-pounds on the ring-top screws.
• It is made in the USA and covered by Leupold’s lifetime guarantee.

Frequently Asked Questions

Do I need a separate base? No. BackCountry ringmounts bolt directly to the Winchester XPR receiver; the base and ring are one piece on each side.

Which scopes fit? Any riflescope with a 1-inch main tube. The medium height clears most objective bells on 1-inch hunting scopes; Leupold’s ring height chart confirms the fit for a given objective size.

What torque do the screws take? Leupold lists 22 inch-pounds for the base-to-receiver screws and 28 inch-pounds for the ring-top screws.

Buy the Leupold BackCountry Winchester XPR 2-Piece Ringmounts, 1-Inch Medium, Matte

Ounces add up on a mountain rifle, and a direct-attach aluminum mount is where many of them hide. Order these Leupold ringmounts with the rest of our scope rings from our Lubbock, Texas gun shop for fast direct shipping.