The DNZ CVA Rifle 1-Inch High Scope Mount is a black one-piece scope mount from DNZ that sets 1-inch rings at high height on CVA rifle barrels, meaning all 2010 and newer break-open black powder barrels and centerfire rifle barrels of any year (DNZ part no. 10034). DNZ machines the Game Reaper line in the USA and sizes each mount to a specific receiver pattern, so the receiver fit is the first thing to confirm. At high height the scope tube centerline sits 1.25 inch above the barrel, which is the number to compare against your scope’s objective bell and your stock. It suits a CVA break-open muzzleloader or centerfire rifle, with no moving parts between the rifle and the optic. The maker’s own receiver specifications are listed below so you can check them against your rifle before ordering.

Key Specifications

• The mount is made for CVA 2010 and newer black powder and centerfire rifle barrels, so the base lines up with that receiver’s factory-drilled holes.
• Rings are sized for a 1-inch scope tube, so the scope clamps directly without extra inserts.
• Mount height is high at 1.25 inch from the top of the barrel to the centerline of the scope tube, a figure to match against your objective bell.
• The finish is black, a low-glare look that suits most blued and synthetic rifles.
• It is a one-piece unit with the base and rings machined together, so the rings stay aligned with each other.
• Base screws are 8-40 x 1/4 inch and take a 9/64-inch Allen wrench, so check what your receiver is drilled and tapped for.
• Ring screws are 6-40 x 5/8 inch and take a 7/64-inch Allen wrench, which keeps ring tightening a one-tool job.
• Outside to outside, the rings measure 3.92 inches, the overall length to weigh against your scope’s tube length.
• The rings are .63 inch wide with two screws per ring, the standard-ring layout.
• Construction is billet aluminum machined from a solid block, with no moving parts between the rifle and the scope.

Frequently Asked Questions

Which rifles does this mount fit? It is listed by the maker for CVA rifle barrels, meaning all 2010 and newer break-open black powder barrels and centerfire rifle barrels of any year. Compare your receiver’s hole spacing and base screw size with the specifications above before ordering.

Does it fit older CVA black powder barrels? No. This mount is for 2010 and newer break-open black powder barrels and centerfire barrels of any year; the maker sells a separate mount for 2009 and older black powder barrels, which do not take this one.

What scope tube size and height does this mount use? The rings fit a 1-inch scope tube at high height, which puts the tube at 1.25 inch from the receiver top to the scope centerline.

Buy the DNZ Game Reaper CVA Rifle 1-Inch High Scope Mount for 2010 and Newer Black Powder and Centerfire Barrels, Black

Matching a mount to a receiver is a one-time decision, and this one is made for CVA 2010 and newer black powder and centerfire rifle barrels. Order it from our Lubbock, Texas gun shop for fast, insured shipping, and browse more scope bases while you are here.