The DNZ Howa/Remington 700 1-Inch High Silver Mount is a silver two-piece scope mount from DNZ that sets 1-inch rings at high height on the Howa 1500 and Mini, Mauser M18, Mossberg 100 ATR, 4×4 and Patriot, Nosler M48, Weatherby Vanguard, Remington 700, 721, 722 and 725, and Bergara B14 rifles (DNZ part no. 701H2S). DNZ machines the Game Reaper 2 line in the USA and sizes each mount to a specific receiver pattern, so the receiver fit is the first thing to confirm. At high height the scope tube centerline sits 1.23 inch above the receiver, which is the number to compare against your scope’s objective bell and your stock. It suits a Howa, Remington or Weatherby hunting rifle that wants a silver two-piece mount, with no moving parts between the rifle and the optic. The maker’s own receiver specifications are listed below so you can check them against your rifle before ordering.

Key Specifications

• The mount is made for Howa 1500, Mossberg 100 ATR, Weatherby Vanguard, Remington 700 and related, so the base lines up with that receiver’s factory-drilled holes.
• Rings are sized for a 1-inch scope tube, so the scope clamps directly without extra inserts.
• Mount height is high at 1.23 inch from the top of the receiver to the centerline of the scope tube, a figure to match against your objective bell.
• The finish is silver, chosen to match a stainless or silver-toned receiver.
• Base screws are 6-48 x 1/4 inch and take a 7/64-inch Allen wrench, so check what your receiver is drilled and tapped for.
• Front mount hole spacing is .86 inch and rear mount hole spacing is .60 inch, and the rear mount is taller than the front because the receiver sits lower at the back.
• The rings are .63 inch wide with two screws per ring, the standard-ring layout.

Frequently Asked Questions

Which rifles does this mount fit? It is listed by the maker for the Howa 1500 and Mini, Mauser M18, Mossberg 100 ATR, 4×4 and Patriot, Nosler M48, Weatherby Vanguard, Remington 700, 721, 722 and 725, and Bergara B14 rifles. Compare your receiver’s hole spacing and base screw size with the specifications above before ordering.

What scope tube size and height does this mount use? The rings fit a 1-inch scope tube at high height, which puts the tube at 1.23 inch from the receiver top to the scope centerline.

Why is this one silver? The maker offers this Game Reaper 2 Howa and Remington mount in both black and silver, and this part number is the silver finish.

Buy the DNZ Game Reaper 2 Howa 1500, Mossberg and Remington 700 1-Inch High Two-Piece Scope Mount, Silver

A mount that lines up with your receiver holes saves a lot of trial and error at the bench. Get it from our Lubbock, Texas gun shop with fast, insured shipping, and see our other scope accessories and parts as well.