The Dead Air Nomad Ti XC direct thread silver suppressor (Dead Air part no. NOMADTIXCDTSIL) is the simplest, lightest way to run Dead Air’s Ti XC on a single rifle. It threads straight onto a 5/8×24 muzzle, uses a 3D-printed baffle stack, and is rated up to .300 RUM. A HUB rear lets you change mounts later. This one is in raw satin titanium.

Key Specifications

• The bore is .30 caliber, covering the common hunting calibers from .223 and 5.56 up to the .30 magnums.
• The rating is .300 RUM, the largest cartridge Dead Air lists for this suppressor.
• Energy rating is 4,400 ft-lbs, the published ceiling for this can.
• The bare body weighs 7.4 ounces, the lightest in the Nomad line.
• Weight with the included mount is 9.6 ounces, the figure for the direct thread setup as shipped.
• Outer diameter is 1.76 inches, the figure to check against scope and handguard clearance.
• The body is Grade 5 titanium, chosen for strength at very low weight.
• The finish is raw satin titanium, matched to this color version.
• The mount is a 5/8×24 direct thread on a HUB rear, so it threads straight to the muzzle and can be swapped for other HUB mounts later.
• The barrel guidance is 12.5 inches minimum for supersonic 5.56 and 6 inches for subsonic .300 BLK, which matters when pairing it with a short barrel.

Frequently Asked Questions

What calibers can I run on it? It is a .30 caliber suppressor rated up to .300 RUM, covering .223 and 5.56 through .308 and the .30 magnums. Dead Air asks for a 12.5-inch minimum barrel for supersonic 5.56 and 6 inches for subsonic .300 BLK.

How much does the Nomad Ti XC direct thread weigh? The bare titanium body weighs 7.4 ounces, and the direct thread setup weighs 9.6 ounces with the mount installed.

Do I need ATF approval to buy this? No. As of October 9, 2026, ATF no longer requires Form 4 approval, registration or a tax stamp for suppressors. It transfers on a Form 4473 with a background check through a Class 3 (SOT) dealer. State and local laws still apply.

Buy the Dead Air Nomad Ti XC .30 Cal Direct Thread Suppressor, Silver

As of October 9, 2026, this suppressor transfers on a Form 4473 with a background check at your Class 3 (SOT) dealer, with no Form 4 or tax stamp; state and local laws still apply. Order through Dead Air Silencers‘s silencers and suppressed firearms lineup and our Lubbock, Texas team will handle the transfer.