The Burris Zee Rings in 1-inch low height with a matte finish (Burris part no. 420083) are Weaver-style scope rings machined from solid steel. Burris machines them to exact tolerance and matches each top and bottom half, so the ring clamps the scope evenly without pinching the tube. The low height suits 1-inch scopes with smaller objective lenses on a Weaver-style base, and the matte surface keeps glare off the rail. For a hunting rifle or range gun that needs a plain, strong ring, this is a sound choice.

Key Specifications

• The ring style is Weaver-style, made to clamp onto Weaver-pattern bases.
• The ring size is 1 inch, built for scopes with a 1-inch main tube.
• Height is low, which keeps the scope close to the bore on rifles that allow it.
• Height to the center of the tube is 0.65 inch, the figure to check against your objective bell and barrel.
• The finish is matte, which cuts glare and blends with a blued or parkerized rifle.
• Construction is solid steel, chosen for rigidity under recoil.
• Top ring screws are torqued to 20 inch-pounds, the maker’s figure for clamping the scope securely.
• Ring cross bolts are torqued to 30 inch-pounds, so each ring locks to the base at the maker’s setting.
• The tops and bottoms are matched for strength and fit, which helps the rings seat squarely.

Frequently Asked Questions

What scope tube size do these rings fit? They are 1-inch rings, so they fit scopes with a 1-inch main tube.

Is this the low, medium or high height? This listing is the low height, with a height to center of 0.65 inch and a matte finish.

What torque do I use when mounting them? Burris lists 20 inch-pounds for the top ring screws and 30 inch-pounds for the ring cross bolts.

Buy the Burris Zee Rings, Weaver-Style 1-Inch, Low, Matte

Solid steel rings machined to tolerance are a dependable way to hold a scope in place without stressing the tube. Order them from our Lubbock, Texas gun shop for fast, direct shipping, and look through more scope rings for the rest of your mounting setup.