The Burris XTR Xtreme Tactical 2-Piece Rings in 1-inch medium with a matte finish (Burris part no. 420181) were built to take brutal use from competitors and tactical operators. They are lightweight, have plenty of holding power and can endure any amount of recoil. The rings fit most Weaver and all Picatinny-style mounts, and the 1-inch models are made of aluminum for weight savings. A medium ring sets the scope 1 inch above the rail to the center of the tube. They also suit hunting rifles, slug guns and muzzleloaders.

Key Specifications

• The ring size is 1 inch, matching a 1-inch scope tube.
• The ring height is medium, which sets the scope at a mid-level clearance over the rail.
• Height to center is 1 inch, so you can plan objective clearance.
• The finish is matte, which cuts glare.
• Construction is aluminum for the 1-inch models, which saves weight without giving up strength.
• The rings fit most Weaver and all Picatinny-style mounts.
• Top ring torque is 20 inch-pounds, which clamps the scope without crushing the tube.
• Ring cross bolts torque to 65 inch-pounds for a firm hold on the base.
• The set is a two-piece ring pair, one front and one rear.

Frequently Asked Questions

What scope tube size do these fit? They fit scopes with a 1-inch main tube.

What bases do they fit? Burris says the Xtreme Tactical Rings fit most Weaver and all Picatinny-style mounts.

What torque should I use? Burris lists the top ring torque at 20 inch-pounds and the ring cross bolts at 65 inch-pounds.

Buy the Burris XTR Xtreme Tactical 2-Piece Rings, 1-Inch Medium, Matte

Strong rings keep a scope on zero through recoil, and the Xtreme Tactical line was designed for that. Browse more from Burris in our scope rings category, then order from our Lubbock, Texas gun shop for fast, direct shipping.