The AGM Rattler-C V2 50-640 Thermal Imaging Clip-On, 640×512, 50mm Lens (AGM part no. 314205560206R561) is a thermal clip-on for day scopes from AGM Global Vision with a 640×512 thermal sensor and a 50 mm lens. It clips in front of a day scope and turns it into a thermal imager, with AGM suggesting LPVOs and magnified optics, ideally 1x to 6x. It starts at 1x base magnification with digital zoom to 8x, and the 12-micron sensor is rated at less than 20 mK sensitivity with a 50 Hz refresh rate. This 50 mm, 640×512 version is the long-reach model in the Rattler-C V2 line.

Key Specifications

• The thermal sensor resolution is 640×512 at a 12-micron pixel pitch, which sets how much detail the image holds on a target.
• Base magnification is 1x with digital zoom up to 8x, so the clip-on keeps the day scope’s view until you zoom.
• The objective lens is 50 mm, which sets the balance between field of view and detection range.
• The field of view is 8.8 by 7.0 degrees, or 46 by 37 feet at 100 yards, which governs how much ground you cover at a glance.
• Detection range is rated at 2,600 m/yd, the distance at which AGM says a heat signature can be picked up.
• Battery life is up to 9 hours, enough for a long night out.
• Weight is 1.20 lb, a light addition ahead of the day scope.

Frequently Asked Questions

How far can the Rattler-C V2 50-640 detect? AGM rates the detection range at 2,600 m/yd, and its page cites potential ranges up to 2,800 yards.

Do I need special tools to install it? No. AGM says the clip-on attaches in front of a day scope without special tools or equipment.

Buy the AGM Rattler-C V2 50-640 Thermal Imaging Clip-On, 640×512, 50mm Lens

Order the AGM Rattler-C V2 50-640 Thermal Imaging Clip-On, 640×512, 50mm Lens from our Lubbock, Texas gun shop for fast, insured shipping. More from AGM Global Vision is in our thermal sights lineup.