The AB Suppressor Raptor 8 7.62mm suppressor (AB part no. F22-78-BB) is the eight-spiral Raptor, supplied with a 3-inch Reflex mount in 5/8×24. AB says fewer baffles make a Raptor lighter and shorter at some cost in suppression, so eight spirals sit between the short hunting builds and the ten-spiral stack. The 3-inch Reflex lets the suppressor wrap back over the barrel, adding blast chamber volume without adding length. AB welds the body from titanium in a tubeless design and finishes it in high-temperature Cerakote. It suits a .30 caliber rifle that needs to stay handy without giving up much suppression.

Key Specifications

• The bore is 7.62mm, rated for SAAMI centerfire cartridges with projectiles of 7.62mm or less.
• The stack is eight spiral baffles, a middle step between the short and full-length Raptor builds.
• The included 3-inch Reflex mount in 5/8×24 adds blast chamber volume around the barrel.
• Construction is 100 percent titanium for the spirals, end cap, blast chamber and mounts, welded into a tubeless body.
• The finish is C-138 Jet Black high-temperature Cerakote, which AB says holds up to full-auto temperatures.
• The minimum barrel length is 8 inches for .300 Blackout, and 16 or 22 inches for 7.62 magnum cartridges.
• Magnum cartridges need a Reflex mount of at least 2 inches, which the included 3-inch mount meets.

Frequently Asked Questions

Do I need ATF approval to buy this? No. As of October 9, 2026, ATF no longer requires Form 4 approval, registration or a tax stamp for suppressors. It transfers on a Form 4473 with a background check through a Class 3 (SOT) dealer. State and local laws still apply.

Raptor 8 or Raptor 10? AB says fewer baffles make the Raptor lighter and shorter, while more baffles make it longer, heavier and quieter. The Raptor 8 is the middle ground.

What comes in the box? AB sells every Raptor with a Reflex mount, a flush mount, an end cap and a six pin tool.

Buy the AB Suppressor Raptor 8 7.62mm Suppressor, 3-Inch Reflex Mount, 5/8×24 Thread

As of October 9, 2026, this suppressor transfers on a Form 4473 with a background check at your Class 3 (SOT) dealer, with no Form 4 or tax stamp; state and local laws still apply. Order through AB Suppressor‘s silencers and suppressed firearms lineup and our Lubbock, Texas team will handle the transfer.