The Forster Products 6.5x47mm Lapua Full Length Sizing Die (brand part no. 005346) resizes fired 6.5x47mm Lapua brass back down to SAAMI-spec dimensions so loaded rounds chamber reliably, even across more than one rifle. Forster Products machines the die from hardened steel for a smooth, consistent stroke and a long service life on the reloading bench. It’s the sizing half of a two-die setup, pairing with a seating die to complete the process for reloaders who prioritize reliable feeding and chambering over the reduced brass life of neck-only sizing.

Key Specifications

• Full-length resizes fired 6.5x47mm Lapua brass to SAAMI-spec dimensions for reliable chambering.
• Machined from hardened steel for a smooth resizing stroke and long die life.
• Threads into a standard 7/8-14 press hole, fitting any single-stage or turret press.
• Works as the sizing half of a complete two-die set, pairing with a matching seating die.

Frequently Asked Questions

Does this die decap and resize in one stroke? Yes, a standard decapping pin punches the spent primer out during the same stroke that resizes the case.

Do I need a separate seating die? Yes, this is a full-length sizing die only; pair it with a 6.5x47mm Lapua seating die to complete your two-die setup.

Will this die work on brass fired in a different rifle? Yes, full-length sizing is designed specifically to bring brass fired in any rifle back to SAAMI-spec dimensions for reliable chambering.

Buy the Forster Products 6.5x47mm Lapua Full Length Sizing Die

Order the Forster Products 6.5x47mm Lapua Full Length Sizing Die from our reloading dies catalog and keep your 6.5x47mm Lapua brass chambering reliably. Ships fast from a Lubbock, TX gun shop.