The Resilient Suppressors Ramblin Man (.46 Cal) is a lightweight, modular titanium suppressor designed as a one-suppressor answer for several firearms (Resilient part no. RS-RM). It uses a HUB mounting system and is compatible with R-Series front caps, so it is easy to customize. Resilient builds it from 6AL-4V titanium that is CNC laser welded, finishes the can in high temp Cerakote and coats the mount in DLC. It runs in a long configuration at 7.72 inches or a short one at 5.46 inches, both measured without the mount, and covers pistol cartridges up to 45 ACP and 10mm along with a range of rifle cartridges.

Key Specifications

• Long configuration length is 7.72 inches without the mount, the setup for the most sound reduction.
• Short configuration length is 5.46 inches without the mount, for a handier host.
• Weight without the mount is 8.8 ounces long and 6 ounces short, very light for a .46 cal can.
• Diameter is 1.490 inches, slimmer than most rifle-rated suppressors.
• Construction is 6AL-4V titanium, CNC laser welded, the reason the weight stays so low.
• The mount is an 11/16×24 direct thread adapter on 1.375×24 HUB threads, which Resilient coats in DLC.
• Allowable mounting depth is 1.750 inches, the figure to check against the host’s muzzle device.

Frequently Asked Questions

Which calibers can I run through the Ramblin Man? Resilient lists no barrel restriction for 45 ACP, 10mm, 9mm, 44 Mag and 45 Long Colt, and rates it for full auto on those pistol cartridges. Rifle minimums include 10.5 inches for 5.56/223, 6.5 Grendel, 6 ARC, 450 Bushmaster and 458 SOCOM, 8 inches for 8.6 Blackout, 7.62×39 and 350 Legend, 14.5 inches for .308 and 6.5 Creedmoor, and 22 inches for 300 RUM, 300 PRC and 300 Win.

Should I use a flash hider with it? No. Resilient advises against using a flash hider with the Ramblin Man, calls it a light-duty suppressor not intended for high rates of fire on centerfire rifle cartridges, and says to keep it under 750 degrees.

Do I need ATF approval to buy this? No. As of October 9, 2026, ATF no longer requires Form 4 approval, registration or a tax stamp for suppressors. It transfers on a Form 4473 with a background check through a Class 3 (SOT) dealer. State and local laws still apply.

Buy the Resilient Suppressors Ramblin Man .46 Cal Titanium Suppressor

As of October 9, 2026, this suppressor transfers on a Form 4473 with a background check at your Class 3 (SOT) dealer, with no Form 4 or tax stamp; state and local laws still apply. Order through Resilient Suppressors‘s silencers and suppressed firearms lineup and our Lubbock, Texas team will handle the transfer, and it ships fast to your Class 3 dealer.