The Resilient Suppressors Putnik 7.62mm is a suppressor built for the modern AK, designed to stay as true to Russian design as possible (Resilient part no. RS-PUTNIK). It uses the same baffle technology as the Jolene line, arranged in a tri-axial design that Resilient says gives very low back pressure next to the competition. Because AK muzzles often have non-concentric threads and loose tolerances, Resilient cut a progressive bore into the Putnik, and it still recommends checking bore clearance with an alignment rod before use. The can mounts directly on a 24×1.5mm thread or through its 1.375×24 HUB threads. For an AK owner, it is a suppressor designed around the rifle rather than adapted to it.

Key Specifications

• The barrel minimums are 8 inches for 5.45×39, 5.56, 7.62×39 and 300 Blackout and 14.5 inches for .308 and 6.5 Creedmoor.
• It is full-auto rated under 1,000 degrees Fahrenheit on 5.45×39, 5.56, 7.62×39 and 300 Blackout.
• Length with the mount is 6.2 inches, short enough to keep an AK handy.
• Weight without the mount is 20.9 ounces, the heft of a can built for sustained fire.
• Materials are 17-4 stainless steel and 6AL4V titanium, a pairing chosen for heat tolerance and strength.
• The direct thread is 24×1.5mm, the metric pitch common on AK-pattern barrels, and the rear accepts 1.375×24 HUB or Bravo mounts.
• Allowable mounting depth is 1.600 inches, the limit to check before fitting a long muzzle device.

Frequently Asked Questions

Do I need a muzzle brake under the Putnik? Resilient recommends a muzzle brake on barrels shorter than 12 inches.

Do I need ATF approval to buy this? No. As of October 9, 2026, ATF no longer requires Form 4 approval, registration or a tax stamp for suppressors. It transfers on a Form 4473 with a background check through a Class 3 (SOT) dealer. State and local laws still apply.

Is the Putnik rated for full auto? Yes. Resilient rates it for full auto, under 1,000 degrees Fahrenheit, on 5.45×39, 5.56, 7.62×39 and 300 Blackout, with an 8-inch minimum barrel for those cartridges and 14.5 inches for .308 and 6.5 Creedmoor.

Buy the Resilient Putnik 7.62mm AK Suppressor, 24×1.5mm Direct Thread

As of October 9, 2026, this suppressor transfers on a Form 4473 with a background check at your Class 3 (SOT) dealer, with no Form 4 or tax stamp; state and local laws still apply. Check bore clearance with an alignment rod first, as Resilient advises for AK muzzles. Order through Resilient Suppressors‘s silencers and suppressed firearms lineup and our Lubbock, Texas team will handle the transfer, and it ships fast to your Class 3 dealer.