The LWRCI High Flow 762-Ti suppressor is a welded titanium, quick-detach can for precision rifles (LWRCI part no. U07-0434C01). It is rated for cartridges up to 7.62 diameter, with .308, 6.5 Creedmoor and 6.8 SPC as LWRCI’s examples, and LWRCI lists it as magnum rated and approved. A vented blast chamber and multi-chamber baffle stack strip gas away from the projectile and push it out through a vented endcap, which keeps backpressure on the host rifle low. The bore is wire EDM cut for a precise, uniform bore. At 13 ounces it is a light choice for a bolt gun or a precision semi-auto.

Key Specifications

• The caliber rating is up to 7.62 diameter cartridges, with .308, 6.5 Creedmoor and 6.8 SPC named as examples.
• LWRCI lists it as magnum rated and approved, so it carries a higher pressure rating than a standard rifle can.
• Length is 7.5 inches, a mid-length body for a .30 caliber can.
• Width is 1.75 inches, the diameter of the tube.
• Weight is 13 ounces, light for a suppressor in this caliber class.
• The body is fully welded titanium, built for strength without the weight of steel.
• Attachment is quick detach through the QD flash hider, which ships with a 5/8×24 mount.
• The bore is wire EDM cut, which gives a precise, uniform bore, and each can is runout tested.
• The coating is C-Series Cerakote, rated for high temperatures.
• LWRCI lists the intended use as precision rifle, with a design that reduces backpressure at the shooter.

Frequently Asked Questions

Is the High Flow 762-Ti rated for full-auto fire? No. LWRCI says it can handle limited bursts or sustained semi-auto fire, but not continuous full auto.

What mount does the quick-detach version use? It uses the LWRCI QD flash hider, which ships with a 5/8×24 mount.

Do I need ATF approval to buy this? No. As of October 9, 2026, ATF no longer requires Form 4 approval, registration or a tax stamp for suppressors. It transfers on a Form 4473 with a background check through a Class 3 (SOT) dealer. State and local laws still apply.

Buy the LWRCI High Flow 762-Ti Suppressor, Quick Detach

As of October 9, 2026, this suppressor transfers on a Form 4473 with a background check at your Class 3 (SOT) dealer, with no Form 4 or tax stamp; state and local laws still apply. Titanium and a welded build make this a can for shooters who care about carrying weight as much as sound reduction. Choose the quick-detach version when you want to move one suppressor between rifles. Order through LWRCI‘s suppressors lineup and our Lubbock, Texas team will handle the transfer.