The EOTech EXPS3-0 holographic weapon sight in tan (EOTech part no. EXPS3-0TAN) brings the EXPS3’s two-eyes-open speed to a rifle built in earth tones. It adds night vision compatible settings and a 7mm raised quick-detach base for a lower 1/3 iron sight co-witness. The 1-dot speed ring pairs a 68 MOA ring with a 1 MOA dot. EOTech builds it in the USA. It suits a tan or FDE carbine that may be run with night vision.

Key Specifications

• The finish is tan, which matches earth-tone rifles and gear.
• The reticle is a 68 MOA ring with a 1 MOA dot, with three aiming points calibrated for .223 caliber and 62-grain loads at 2,900 fps.
• The 7mm raised quick-detach base sets up a lower 1/3 iron sight co-witness.
• It is night vision compatible, with 10 additional settings for Gen I through III+ devices.
• There are 20 daylight brightness settings for use in a wide range of light.
• Windage and elevation adjust in 0.5 MOA clicks for precise zeroing.
• Power is a single CR123 battery, rated for 1,000 continuous hours at nominal setting 12 at room temperature.
• It is water resistant to 33 feet (10 meters).
• It mounts to a 1-inch Weaver or MIL-STD-1913 rail.
• It weighs 11.2 ounces and measures 3.8 by 2.3 by 2.9 inches.

Frequently Asked Questions

What color is this EXPS3-0? This version is tan. The 1-dot speed ring reticle, night vision settings and base match the black EXPS3-0.

Is it night vision compatible? Yes. It has 10 additional settings for Gen I through III+ night vision devices on top of its 20 daylight settings.

What battery does it need? One CR123 battery, rated for 1,000 continuous hours at nominal setting 12 at room temperature.

Buy the EOTech EXPS3-0 Night Vision Compatible Holographic Weapon Sight, Tan

Matching optic color to the rest of the rifle is a small detail that looks good, and the tan EXPS3-0 does it without changing the features. Order it from our Lubbock, Texas gun shop for fast, insured shipping, and see more red dot sights from the same line.