The EOTech EXPS3-0 night vision compatible holographic weapon sight in black (EOTech part no. EXPS3-0) is a professional-grade HWS with true two-eyes-open shooting for fast target acquisition. It adds night-vision compatible settings and a 7mm raised quick-detach base for a lower 1/3 iron sight co-witness. The 1-dot speed ring pairs a 68 MOA ring with a 1 MOA dot. EOTech builds the EXPS3 in the USA, and it suits a defensive carbine that may be run with night vision.

Key Specifications

• The reticle is a 68 MOA ring with a 1 MOA dot, with three aiming points calibrated for .223 caliber, 62-grain loads.
• The 7mm raised quick-detach base sets up a lower 1/3 iron sight co-witness.
• It is night vision compatible, with 10 additional settings for Gen I through III+ night vision devices.
• There are 20 daylight brightness settings for use in a wide range of light.
• Side buttons put the brightness controls within easy reach.
• Windage and elevation adjust in 0.5 MOA clicks, which allows precise zeroing.
• Power is a single CR123 battery, a common and easy-to-find cell.
• Battery life is 1,000 continuous hours at nominal setting 12 at room temperature.
• It is water resistant to 33 feet (10 m), which is more than most carbines will see.
• It mounts to a 1-inch Weaver or MIL-STD-1913 rail and weighs 11.2 ounces.

Frequently Asked Questions

Is the EXPS3-0 night vision compatible? Yes. It has 20 daylight brightness settings plus 10 additional settings for Gen I through III+ night vision devices.

How deep can it go underwater? EOTech rates the EXPS3 as water resistant to 33 feet (10 m).

How is the EXPS3-0 different from the EXPS3-1? The EXPS3-0 has the 68 MOA ring with a 1 MOA dot, while the EXPS3-1 has a single 1 MOA dot with no ring.

Buy the EOTech EXPS3-0 Night Vision Compatible Holographic Weapon Sight, Black

The EXPS3 is built for professional use, and the -0 reticle is the familiar ring and dot. Order it from EOTech in our red dot sights at our Lubbock, Texas gun shop for fast, direct shipping.