The Weaver Gunsmith Hammer and Punch Set puts eight steel punches and a dual-face hammer on your bench for firearm disassembly and reassembly (Weaver part no. 849723). The punches are sized to fit just about any pin you will meet on a pistol, rifle or shotgun. The hammer carries a brass face and a plastic face, so you can choose the softer strike that drives a pin without marring the finish around it. Weaver put the set together so a home gunsmith can work the way a professional does, with the right tool for each pin.

Key Specifications

• The set includes eight steel punches, a spread of sizes that covers most firearm pins.
• The punches are made of steel, which holds its shape when driving stubborn pins.
• The hammer has a brass face, soft enough to drive pins without damaging steel parts.
• A plastic face on the other side of the hammer gives the gentlest strike for finished surfaces.
• Weaver sizes the punches to fit just about any pin found on common firearms.
• Both hammer faces are softer than steel, which helps prevent marring the finish around a pin.
• The set is built for firearm disassembly and reassembly, driving pins out and seating them again.
• The hammer is one tool with two faces, so you can switch from brass to plastic by turning it over.
• It is packaged as a complete kit, so the hammer and punches stay together on the bench.

Frequently Asked Questions

What is in the set? You get eight steel punches and a gunsmith hammer with one brass face and one plastic face.

Why does the hammer have two faces? The brass and plastic faces are softer than steel, so you can tap pins in or out gently without marring the firearm or the punch.

Buy the Weaver Gunsmith Hammer and Punch Set

Driving pins with a household hammer is how receivers get scratched and pins get mushroomed. Equip your bench with a proper set from our gunsmithing tools and supplies and we will ship it fast from our Lubbock, Texas gun shop.