The Forster Products 6.5x47mm Lapua Bench Rest Seater Die (brand part no. 006015) brings match-grade seating consistency to 6.5x47mm Lapua handloads without the added cost of a micrometer top. A spring-loaded, self-centering sleeve aligns the case and bullet on the same axis before the seating stem makes contact, which is the same design principle Forster Products uses across its bench-rest die line. It’s built for reloaders chasing low runout and tight groups, whether at a bench-rest match or on a hunting rifle that deserves better-than-factory ammunition.

Key Specifications

• Sized specifically for 6.5x47mm Lapua brass and bullets, with no separate bushing or insert required.
• Uses a spring-loaded, self-aligning sleeve that centers the bullet in the case neck for consistently low runout.
• Adjustment ring sets and holds seating depth for repeatable results load after load.
• Threads into a standard 7/8-14 press hole, compatible with any single-stage or turret press.

Frequently Asked Questions

Is a shell holder included with this die? No, this seater die does not include a shell holder; use the standard shell holder for the cartridge, sold separately.

How does this differ from a micrometer seater die? It uses the same self-aligning sleeve for concentricity, but adjusts with a standard threaded ring instead of a graduated micrometer top.

Can this die be used for both hunting and precision 6.5x47mm Lapua loads? Yes, the self-aligning sleeve benefits any load where consistent bullet runout matters, from hunting rounds to precision handloads.

Buy the Forster Products 6.5x47mm Lapua Bench Rest Seater Die

Pick up the Forster Products 6.5x47mm Lapua Bench Rest Seater Die from our reloading dies selection and tighten up your 6.5x47mm Lapua handloads. Ships fast from a Lubbock, TX gun shop.