The Forster 6.5 PRC Bushing Full-Length Sizing Die (brand part no. FBD4409) sizes 6.5 PRC case bodies and bumps the shoulder for reliable chambering while an interchangeable neck bushing controls exactly how much neck tension the brass gets, instead of running the neck through a fixed expander. Forster Products sells bushings separately in 0.001-inch increments, so handloaders can dial in tension without over-working the brass on every firing. That control over neck tension is a common reason handloaders doing precision and competition shooting step up to a bushing die.

Key Specifications

• Sized for the 6.5 PRC cartridge’s case body and shoulder dimensions.
• An interchangeable neck bushing controls neck tension precisely instead of a fixed expander ball.
• Still sizes the case body and bumps the shoulder for reliable chambering, same as a standard full-length die.
• Bushings are sold separately in 0.001-inch increments to fine-tune tension for specific brass and bullets.
• A common upgrade for handloaders doing precision and competition shooting who want tighter control over neck tension.

Frequently Asked Questions

Are neck bushings included with this die? No, bushings are sold separately in 0.001-inch increments so you can select the exact tension for your brass.

Does this die still bump the shoulder? Yes, it sizes the case body and bumps the shoulder the same as a standard full-length die; only the neck sizing method differs.

Is this die specific to 6.5 PRC? Yes, it’s machined for 6.5 PRC case dimensions and is not interchangeable with other cartridges.

Buy the Forster 6.5 PRC Bushing Full-Length Sizing Die

Order the Forster 6.5 PRC Bushing Full-Length Sizing Die from our Lubbock, Texas gun shop for fast shipping to your bench. See our reloading dies selection for matching bushings and a 6.5 PRC seating die.