The Starrett No. 174 Straight Handle Tap Wrench, 0-14 Tap Size gives precise, controlled leverage for turning small numbered taps by hand. Starrett builds this tap wrench with a straight handle sized to accept taps in the 0 to 14 numbered range, the small fastener sizes commonly found on sight bases, small accessory screws, and other fine gunsmithing hardware. The straight handle format gives a more direct feel for torque than a T-handle wrench on these smaller taps, helping a gunsmith sense when a tap is cutting cleanly versus binding, which matters when a broken tap in a small hole can mean a very difficult repair.

Key Specifications

• Accepts taps sized 0 to 14 in the numbered range.
• Uses a straight handle design for direct torque feedback.
• Classified as a tap wrench.

Frequently Asked Questions

What size taps does the No. 174 hold? Numbered taps from size 0 to 14, common on small gunsmithing fasteners.

Why use a straight handle instead of a T-handle? It gives more direct feedback on torque, helping sense when a small tap is cutting cleanly versus starting to bind.

Buy the Starrett No. 174 Straight Handle Tap Wrench

Small taps need careful control, and this wrench is built to provide it. Order it from our gunsmithing tools and supplies selection at our Lubbock, Texas gun shop for fast shipping.