The Wheeler Master Roll Pin Punch Set from Wheeler Engineering (brand part no. 110128) combines the Roll Pin Starter Set and the Ball Profile Pin Punch Set with a gunsmithing hammer in one kit. The punches are machined and hardened from steel to resist bending and breaking while you start and drive roll pins. It is a practical bench kit for anyone who swaps pins in triggers, sights, handguards and other firearm parts.

Key Specifications

• The kit combines the Roll Pin Starter Set and the Ball Profile Pin Punch Set with a hammer, so the starting and driving punches come together.
• The punches are machined and hardened steel, which resists bending or breaking while starting and driving roll pins.
• The set covers nine sizes from 5/16 inch down to 1/16 inch, listed as 5/16, 1/4, 7/32, 3/16, 5/32, 1/8, 3/32, 5/64 and 1/16 inch.
• Knurled handles give you a positive grip on each punch.
• The included hammer is a small hammer, which gives precise control on smaller roll pins.
• One hammer face is nylon, giving a non-marring surface for striking.
• The other hammer face is brass, which drives the punches without deforming them.

Frequently Asked Questions

What comes in the Master Roll Pin Punch Set? It combines Wheeler’s Roll Pin Starter Set and Ball Profile Pin Punch Set with a gunsmithing hammer.

Which pin sizes does the set cover? The listed sizes are 5/16, 1/4, 7/32, 3/16, 5/32, 1/8, 3/32, 5/64 and 1/16 inch.

Does the hammer mar the work? The hammer has a nylon face for a non-marring surface and a brass face for driving the punches without deforming them.

Buy the Wheeler Master Roll Pin Punch Set with Hammer

Roll pins go in cleaner with the right punch in your hand, and this kit puts starter punches, ball profile punches and a hammer in one place. Order it from our Lubbock, Texas gun shop for fast, direct shipping, or browse more gunsmithing tools first.