The Bash Target AR550 Round Gong Target (brand part no. 953) is a laser-cut steel target sized at 6 inches in diameter and 1/2 inch thick, built as a reactive gong for rifle and pistol drills. It ships with three 1/2″ mounting holes already cut into the plate, so it can be set up as a static plate or hung as a swinging gong target without any extra drilling. The plate is rated to a 3000 FPS maximum bullet speed and 3000 ft-lb of impact energy, and is intended for use with pellet, rimfire, and rifle projectiles. It uses upgraded AR550 steel, a harder grade than standard AR500 for extended service life against high-velocity impacts. Each plate ships individually, with six packs per case for ranges or dealers ordering in volume, from Bash Target Supply.

Key Specifications

• Target diameter is 6 inches.
• Steel thickness is 1/2 inch.
• Overall dimensions measure approximately 1.00 x 6.65 x 6.85 inches (H x W x L).
• Cut from laser-cut steel for a consistent, clean profile.
• Ships with three 1/2-inch mounting holes for static or gong mounting.
• Impact rating is 3000 ft-lb with a 3000 FPS maximum bullet speed.
• Rated for use with pellet, rimfire, and rifle projectiles.

Frequently Asked Questions

Can this target be hung as a swinging gong? Yes, the three 1/2-inch mounting holes support either a static plate mount or a hanging, swinging gong setup.

What is the maximum rated bullet speed? 3000 FPS, with an impact energy rating of 3000 ft-lb.

Buy the Bash Target AR550 Round Gong Target, 6in

Add a laser-cut steel gong sized for a home or club range. Order this 6-inch AR550 target from our shooting targets lineup at our Lubbock, Texas gun shop for fast, insured shipping.