The Banish Micro Direct Thread Mount in 1/2×28 (Banish part no. 100000350042) replaces the Micro Booster on a BANISH PSTL 9 TI suppressor so it can run directly on a threaded barrel. Banish designed the mount to take the PSTL 9 TI beyond handguns, onto pistol caliber carbines, lever-action rifles and bolt guns in calibers such as 9mm, .300 Blackout and 350 Legend. Because the suppressor mounts straight to the barrel, no booster assembly is needed. Thread pitch is the whole question with a mount like this, and this listing is the 1/2×28 version.

Key Specifications

• The host thread is 1/2×28, so the barrel or muzzle device it mounts to must carry that same thread.
• It is made for the BANISH PSTL 9 TI suppressor, the full-size 9mm model that ships with a Micro Booster.
• The mount takes the place of the Micro Booster, so the suppressor mounts directly with no booster assembly.
• It is intended for pistol caliber carbines, lever-action rifles and bolt guns, host platforms where a booster is not used.
• The PSTL 9 TI is rated for .380 through 9mm, plus .300 BLK and 350 Legend, which sets the calibers you can run behind this mount.
• With a direct thread mount in place of the booster, the PSTL 9 TI measures 6.8 inches long, shorter than its 7.16-inch length with the booster.
• The suppressor weighs 6.73 ounces with a direct thread mount fitted, down from 8.57 ounces with the Micro Booster.
• The PSTL 9 TI that sits on the mount has a 1.35 inch diameter, a slim body sized for pistols and carbines.
• Banish offers the mount in several threads, and the other options are 1/2×28 with stop, 5/8×24 and M13.5x1LH.

Frequently Asked Questions

Which suppressor does this mount fit? It is made for the Banish PSTL 9 TI. Banish lists the Micro Direct Thread Mount as the way to run that suppressor on pistol caliber carbines, lever-action rifles and bolt guns.

What other thread sizes does Banish offer? Besides 1/2×28, the mount is offered in 1/2×28 with stop, 5/8×24 and M13.5x1LH.

Do I still need the Micro Booster? No. Banish says to remove the Micro Booster and replace it with a direct thread mount for pistol caliber carbines, lever guns and similar hosts, so the mount takes the booster’s place.

Buy the Banish Micro Direct Thread Mount, 1/2×28, PSTL 9 TI

A direct thread mount is a small part that decides where a suppressor can go, and matching the thread to your barrel is the only choice to get right. Choose 1/2×28 here if that is your muzzle thread, and see more of our suppressor parts and accessories while you are at it. Order from our Lubbock, Texas gun shop for fast direct shipping.