The Hornady Custom Grade Bullet Seater Die in 7mm PRC (brand part no. 44133) seats bullets to a consistent depth for handloaders building precision or hunting ammunition in this cartridge. It threads into any standard single-stage or turret press using the industry-standard 7/8 inch-14 thread pattern, so it drops straight into an existing die set without any special tooling. A die locking ring is included to hold the seating depth setting once it is dialed in, saving reloaders from re-adjusting the die every session.

Key Specifications

• 7mm PRC Cartridge this die is machined specifically for seating bullets in 7mm PRC cases.
• Bullet Seater Die Type this is a dedicated seating die, not a sizing die, for the final step of the loading process.
• Standard 7/8-14 Threads the die uses the industry-standard 7/8 inch-14 thread pattern, fitting most single-stage and turret presses.
• Die Locking Ring Included a locking ring holds the seating depth setting so it does not shift between reloading sessions.
• Shipping Weight this item ships at approximately 0.515 lb as packaged.

Frequently Asked Questions

What press does this die fit? Any single-stage or turret press that accepts standard 7/8 inch-14 threaded dies.

Does this die size the case, or just seat the bullet? It only seats the bullet; a separate sizing die is required to full-length or neck-size the case first.

Buy the Hornady Custom Grade Bullet Seater Die, 7mm PRC

Round out your 7mm PRC die set with a seater built to Hornady’s tolerances. Order it from Hornady‘s reloading dies lineup at Schaefer Defense, shipped fast from our Lubbock, Texas gun shop.