The DNZ Game Reaper Tikka T3 Mount, 1-Inch Medium, Silver (brand part no. 20550S) is a one-piece scope mount made for the Tikka T3 and T3X. DNZ machines it from aluminum in the USA as a single base with the rings built in, with no moving parts between the rifle and the scope. The rings take 1-inch scope tubes, and the medium mounting height of 1.06 inches to the tube centerline sets the scope’s clearance above the receiver. Its silver finish is the alternative to the black version DNZ also offers for the same rifle. It is a sound choice for a Tikka T3 or T3X that needs a durable silver mount.

Key Specifications

• It is made for the Tikka T3 and T3X, and the maker states that all T3 actions are the same length, so there is one mount for every caliber.
• The mount is a one-piece base and ring design, so there is no moving hardware between the receiver and the scope.
• It is machined from a solid block of billet aluminum, which keeps the mount rigid while holding the weight down.
• The rings are sized for 1-inch scope tubes, so pick the mount by scope tube diameter rather than objective size.
• The medium mounting height measures 1.06 inches from the top of the receiver to the scope-tube centerline, which sets how much clearance the scope has over the barrel and action.
• The finish is silver, a plain tone that suits most hunting rifles.
• Outside to outside, the rings span 4.08 inches on this receiver pattern, which sets the room available for the scope tube between the rings.
• The rings are .63 inch wide with two screws per ring, a slim standard ring that grips the tube without adding bulk.
• Base hole-to-hole spacing is .86-inch, 3.25-inch and .86-inch, which is the pattern the receiver’s drilled-and-tapped holes need to match.
• The hardware is 6-48 x 1/4-inch base screws and 6-40 x 5/8-inch ring screws, and both are driven with a 7/64-inch Allen wrench.

Frequently Asked Questions

Does it fit both the T3 and the T3X? Yes. The maker lists a single Game Reaper pattern for the T3 and T3X, and because every T3 action is the same length, short- and long-action chamberings use the same mount.

What scope tube size and height does it use? It takes 1-inch scope tubes in the medium mounting height, which the maker measures at 1.06 inches from the top of the receiver to the scope-tube centerline.

Does it fit left-hand Tikkas? Yes. DNZ states that its Tikka mount fits both left-hand and right-hand T3 and T3X rifles.

Buy the DNZ Game Reaper Tikka T3 Mount, 1-Inch Medium, Silver

A scope is only as steady as what holds it, and a mount machined for one specific receiver removes the guesswork from the setup. Order it from our Lubbock, Texas gun shop for fast, insured shipping, and browse more scope accessories while you are here.