The RCBS Neck Sizing Die Bushing at 0.269 inch (RCBS part no. 81584) is a precision bushing sized for RCBS bushing-style neck sizing dies. Swapping to the correct bushing diameter lets a handloader dial in exact neck tension for a specific bullet and brass combination instead of relying on a fixed neck size. A 0.269 inch bushing is sized for cases where that neck diameter matches the reloader’s target tension. It’s an inexpensive way to fine-tune sizing without buying a whole new die.

Key Specifications

• Bushing diameter is 0.269 inch.
• Designed for use in RCBS bushing-style neck sizing dies.
• Ships at approximately 0.1 lb.

Frequently Asked Questions

What is this bushing used for? It’s swapped into an RCBS bushing-style neck sizing die to set a specific neck diameter and tension.

What diameter is this bushing? 0.269 inch.

Buy the RCBS Neck Sizing Die Bushing, 0.269 Inch

Dialing in exact neck tension is a small tweak that can noticeably tighten up group sizes, and swapping bushings is the easiest way to test different tensions. Order this RCBS bushing from our shellholders and die accessories selection and we’ll ship it fast from our Lubbock, Texas gun shop.