The Leupold PRW2 30mm low matte rings (part no. 174083) position a 30mm scope closer to the bore than the medium or high PRW2 configurations, favoring a lower cheek weld on hunting and field rifles. Leupold machines these two-piece rings from steel, and the redesigned cross-slot keeper system increases contact with the base for improved clamp stability on both cross-slot and Picatinny bases. A recommended 25 in-lb ring-top screw torque gives installers a defined clamp-force target. Among low-profile scope rings for 30mm optics, this PRW2 configuration is made in the USA.

Key Specifications

• The scope tube accepts a 30mm maintube, matching common mid- to large-diameter optics.
• The rings are manufactured from steel, providing durable clamping strength and resistance to recoil.
• The finish is matte black, which minimizes glare and blends with most rifle finishes.
• The mounting system is Weaver/Picatinny compatible, allowing use with a wide range of bases.
• The height is specified as a low profile to position the optic closer to the bore.
• The keeper uses a cross-slot keeper system redesigned for stronger contact with the base.
• The recommended ring-top screw torque is 25 in-lbs to achieve consistent clamping.

Frequently Asked Questions

Why does a specific torque value matter for this ring? It gives a repeatable clamp force target, avoiding both a loose mount and an over-torqued scope tube.

Is low height right for most 30mm hunting scopes? Yes, low positions the optic closer to the bore for a natural, lower cheek weld on typical hunting rifles.

Buy the Leupold PRW2 30mm Low Matte Rings

A low, close-to-bore mount improves cheek weld consistency shot after shot, and this PRW2 configuration delivers exactly that for 30mm optics. Order it from our Lubbock, Texas gun shop and it ships fast.