The Wilson Combat Silent Bandit 7.62mm 5-baffle suppressor is the shorter Silent Bandit in the .30 caliber bore class, built from Grade 5 titanium with an H13 steel hub mount and end cap (brand part no. SPSB305BLK). The 5-baffle stack measures 5.76 inches, and the assembled can runs 6-3/8 inches and 12.1 ounces. Wilson Combat says its gas management system controls flow and lowers back pressure. The 5/8×24 interface fits the common .30 caliber barrel thread, and the 1-3/8×24 HUB base opens up the industry-standard mount ecosystem. It is built for hunting, practice and tactical use on .308 and 300 Blackout rifles.

Key Specifications

• The bore class is 7.62mm, with typical calibers of 300 HAM’R, 300 Blackout, .308 Winchester, 7.62mm NATO, 7mm-08 Remington and .30-06 Springfield.
• Thread pitch is 5/8×24, the usual pitch on .30 caliber rifle barrels.
• The stack is the 5-baffle configuration, which measures 5.76 inches on its own.
• Overall length is 6-3/8 inches with the end cap and supplied hub mount.
• Weight is 12.1 ounces with the end cap and hub mount installed, light for a .30 caliber can.
• Outside diameter is 1-3/4 inches, a size that fits most rifle setups.
• The baffle stack is 100 percent Grade 5 titanium, chosen for strength, heat resistance and low weight.
• The hub mount and end cap are H13 steel with a black nitride finish, a hardened pairing that resists wear at the threads.
• The base carries a 1-3/8×24 HUB mount, the industry-standard interface that opens up a wide choice of mounts and accessories.
• Wilson Combat rates noise reduction at 28 to 31 dB depending on caliber and model, measured on a B&K 2209 meter.

Frequently Asked Questions

How much does the 7.62mm 5-baffle Silent Bandit weigh? It weighs 12.1 ounces with its end cap and hub mount, at an overall length of 6-3/8 inches.

Is it rated for magnum calibers? Yes. Wilson Combat lists the Silent Bandit as magnum caliber rated, with high heat and corrosion resistance.

Do I need ATF approval to buy this? No. As of October 9, 2026, ATF no longer requires Form 4 approval, registration or a tax stamp for suppressors. It transfers on a Form 4473 with a background check through a Class 3 (SOT) dealer. State and local laws still apply.

Buy the Wilson Combat Silent Bandit 7.62mm Suppressor, 5-Baffle

As of October 9, 2026, this suppressor transfers on a Form 4473 with a background check at your Class 3 (SOT) dealer, with no Form 4 or tax stamp; state and local laws still apply. Order through Wilson Combat‘s suppressors lineup and our Lubbock, Texas team will handle the transfer, and it ships fast to your Class 3 dealer. The short stack keeps a .308 hunting rifle maneuverable in a blind or a truck.