The AB Suppressor Raptor 10 .375 Multi-Cal is the ten-baffle, large-bore version of the Raptor, paired here with a 3-inch bull barrel reflex mount in 5/8×24 (brand part no. F22410BB). Ten spiral baffles make it the longest stack AB offers, and AB builds every Raptor from titanium with a tubeless, circumferentially welded body. At 7.2 inches and 9.5 ounces, it carries that volume without much bulk, and the reflex mount adds blast chamber space around the barrel instead of length. It is meant for a shooter who wants one suppressor to move between several host rifles, using the right aperture for each caliber.

Key Specifications

• The bore is a .375 multi-caliber size, the large-bore end of the 5.56mm, 7.62mm, .338 and .375 range AB Suppressor lists for the Raptor.
• The Raptor 10 uses ten spiral baffles, the longest stack in the line.
• Overall length is 7.2 inches, a figure that matters when you plan how far the muzzle will reach.
• Body diameter is 1.625 inches, the number to check against handguard clearance.
• Weight is 9.5 ounces, light for a suppressor with this much internal volume.
• The body is Grade 5 titanium, which AB Suppressor says is used for the spirals, end cap, blast chamber and mounts.
• The included mount is a 5/8×24 reflex mount sized for a 3-inch bull barrel, and a 5/8×24 flush mount is also supplied.

Frequently Asked Questions

Can I shoot smaller calibers through this larger-bore Raptor? AB Suppressor says using the correct aperture for each caliber increases performance and is critical to maximum suppression, though it is not required when shooting sub-calibers through a larger-bored Raptor.

Is this an NFA item? Yes. As a suppressor, it’s a Title II firearm requiring an approved ATF Form 4 and transfer through an NFA-licensed dealer.

How does the 3-inch reflex mount work? It lets the suppressor use the area around the barrel, which AB Suppressor says greatly increases suppressor volume without increasing the overall length of the firearm.

Buy the AB Suppressor Raptor 10 .375 Multi-Cal Suppressor, 3-Inch Reflex

This is a Title II item regulated under the National Firearms Act. Purchase requires an approved ATF Form 4, no federal transfer tax, and transfer through a licensed NFA (SOT/Class 3) dealer; ATF approval on most individual eForm 4 filings now comes back in days, and trusts take a little longer. Order through AB Suppressor‘s silencers and suppressed firearms lineup and our Lubbock, Texas team will walk you through the transfer process.