The Area 419 Cantilevered Tactical One-Piece Scope Mount for a 35mm tube, 34mm height and 20 MOA cant (Area 419 part no. 419-MCM-353420) is a one-piece aluminum mount that clamps to a Picatinny rail. Its 34mm height makes it a mid-cantilever, which Area 419 says is meant for less offset and use on bolt-action platforms. Area 419 bores the rings as a set after the mount is fully assembled and never takes it apart again, which gives the optic a precise grip on raw aluminum. The 35mm ring size is for a scope with a 35mm main tube, and the 20 MOA cant is built into the base. It is aimed at precision rifle shooters who want a one-piece mount that holds zero.

Key Specifications

• The ring bore is made for a 35mm scope tube, so match it to the main tube of your optic.
• The mount height is 34mm (1.34 inches), which Area 419 describes as a mid-cantilever, which Area 419 says is meant for less offset and use on bolt-action platforms.
• The cant is 20 MOA (5.8 MIL), built into the one-piece base.
• The mount is CNC milled in America from American 7075 aluminum as a one-piece design.
• The ring surfaces are precision bored in raw aluminum for maximum grip on the scope tube.
• The mount is final bored in sets and never fully disassembled after boring, so the rings stay matched.
• Separate rail clamping bars and inset clamping feet give a strong grab on the Picatinny rail and plenty of adjustment along it.
• Steel guide pins between the base and caps aid alignment during assembly.
• Hardware is custom nitrided stainless steel.
• The mount has multiple accessory mounting points, including a small Picatinny section on the front cap and a patent-pending attachment for the Area 419 Tactical Diving Board.

Frequently Asked Questions

What tube size does this mount fit? This version is for a 35mm scope tube. Area 419 sells the mount for 30mm, 34mm, 35mm and 36mm tubes, so confirm your optic before you order.

What is the difference between the 34mm and 39mm heights? Area 419 describes its 34mm (1.34 inch) mounts as mid-cantilevers with less offset for bolt-action rifles, and its 39mm (1.54 inch) mounts as a more traditional AR-style cantilever. This one is the 34mm height.

Does it have a place for accessories? Yes. It has multiple accessory mounting points, a small Picatinny section on the front cap and an attachment for the Area 419 Tactical Diving Board.

Buy the Area 419 Cantilevered Tactical One-Piece Scope Mount, 35mm Tube, 34mm Height, 20 MOA

A one-piece mount takes ring alignment guesswork away, and a bored-as-a-set design is the main reason shooters pay for one. See the rest of our scope mounts and accessories and order from our Lubbock, Texas gun shop for fast, insured shipping.