The Forster Full Length Bushing Ultra Die Set, 6mm Creedmoor (Forster Products part no. UFB4331) pairs Forster’s Bushing Full Length Sizing Die with the Bench Rest Ultra Micrometer Seater Die, built for 6mm Creedmoor handloaders chasing bench-rest-level consistency. The sizing die controls exact neck tension while it sizes the case body and bumps the shoulder in one pass, and the seater’s floating chamber sleeve fully captures the case before the bullet touches it, so seating stays concentric shot after shot. Forster includes a 3-bushing set sized at 0.274 inch, 0.272 inch, and 0.270 inch so the reloader can dial in neck tension without buying a full bushing set separately.

Key Specifications

• Precision-machined for 6mm Creedmoor, sized to that cartridge’s exact case dimensions.
• The Bushing Full Length Sizing Die controls neck tension while sizing the case body and bumping the shoulder.
• Comes with 3 interchangeable bushings, sized at 0.274 inch, 0.272 inch, and 0.270 inch, to fine-tune neck tension.
• The Bench Rest Ultra Micrometer Seater uses a floating chamber sleeve that fully captures the case before seating.
• The seater’s micrometer head adjusts bullet seating depth in fine, repeatable increments.
• Fits any press with the standard 7/8-14 die thread.

Frequently Asked Questions

What do the bushings control? Each bushing sets a different amount of neck sizing, letting the reloader choose exact neck tension on the loaded bullet.

What makes the seater different from a standard seating die? Its floating chamber sleeve fully captures the case before the bullet is seated, keeping the bullet aligned with the case for better concentricity.

Do I need a shellholder? Yes, a standard 6mm Creedmoor shellholder is required and sold separately.

Buy the Forster Full Length Bushing Ultra Die Set, 6mm Creedmoor

Order the Forster Full Length Bushing Ultra Die Set, 6mm Creedmoor from our Forster Products lineup of reloading dies and Schaefer Defense will ship it fast from our Lubbock, Texas gun shop.