Skip to content

Description

The Faxon Duty Series AR-10 barrel in .308 Winchester is a 16-inch Gunner profile barrel with mid-length gas (Faxon part no. 10A810M16NGQ). Faxon Firearms machines it in Greater Cincinnati from 4150 CMV, button rifles it at 1:10 and salt-bath nitrides it inside and out. The Gunner profile, which Faxon called the Big Gunner on AR-10 barrels until it simplified its naming in 2026, holds the weight to 1.91 pounds, about what a heavy 16-inch 5.56 barrel weighs. It ships with a DPMS Gen 1 pattern .308 extension already installed, pinned and headspaced, and a 5/8×24 threaded muzzle with a target crown. Faxon calls it a do-it-all .308 carbine barrel.

Key Specifications

  • The chamber is .308 Winchester, cut to SAAMI specification and checked with a go/no-go headspace gauge after assembly.
  • Barrel length is 16 inches (16.13 inches measured), the carbine length for an AR-10.
  • The Gunner profile runs a .750 inch body behind the gas block, a .875 inch step at the block and a .600 inch section ahead of it to keep weight down.
  • Weight is 1.91 pounds, roughly what a heavy-profile 16-inch 5.56 barrel weighs.
  • Rifling is 1:10 right-hand twist with 4-groove button rifling.
  • Material is 4150 CMV bar stock, the M4/M16 barrel alloy.
  • The finish is salt-bath QPQ nitride on the bore and the exterior.
  • The gas system is mid-length, with a .081 inch port centered 9.81 inches from the breech face.
  • The gas journal is .750 inch and 1.9 inches long, sized for standard .750 inch low-profile gas blocks.
  • The muzzle is threaded 5/8×24 with a target crown, ready for 5/8×24 brakes, flash hiders and suppressor mounts.

Frequently Asked Questions

What is included with the barrel? Faxon includes the 16-inch Gunner barrel with a DPMS Gen 1 pattern .308 barrel extension (FF-300) installed, pinned and headspaced. A gas block, a mid-length gas tube and a muzzle device are not included.

What does it fit? It fits a DPMS Gen 1 / LR-308 pattern AR-10 upper and uses a standard .308 bolt face, a .750 inch low-profile gas block and a mid-length gas tube. Faxon lists any DPMS-pattern free-float handguard 10.5 inches or longer that clears the .875 inch step and a .750 inch low-profile block.

Why use mid-length gas on a 16-inch .308? Faxon places the port about 9.8 inches from the breech, which leaves six inches of barrel past it and runs at lower pressure than carbine-length gas, giving a softer push on the carrier.

Buy the Faxon Duty Series AR-10 Barrel, .308 Win, 16-Inch Gunner Profile

A 16-inch .308 is a heavy, harsh-cycling rifle when the barrel and gas system are wrong, and this one is built to correct both. Order it from our Lubbock, Texas gun shop for fast, insured shipping, then see the rest of our AR-10 barrels for matching parts.

Additional Information

UPC

816341023260

Manufacturer

FAXON FIREARMS

Manufacturer Part Number

10A810M16NGQ

Barrel Length

16''

Caliber/Gauge

.308 / 7.62 NATO

Length

16''

Model

Duty Series

Product Type

Barrel

Rate of Twist

1-10

Sights

No