The DNZ Remington 700 Long Action 20 MOA 30mm Medium Mount is a black one-piece scope mount from DNZ that sets 30mm rings at medium height on Remington 700 long action rifles (DNZ part no. 30702T). DNZ machines the Game Reaper line in the USA and sizes each mount to a specific receiver pattern, so the receiver fit is the first thing to confirm. At medium height the scope tube centerline sits 1.11 inch above the receiver, which is the number to compare against your scope’s objective bell and your stock. It suits a Model 700 long action rifle set up for long-range shooting, with no moving parts between the rifle and the optic. The maker’s own receiver specifications are listed below so you can check them against your rifle before ordering.

Key Specifications

• The mount is made for Remington 700 long action, so the base lines up with that receiver’s factory-drilled holes.
• Rings are sized for a 30mm scope tube, the larger diameter used on many modern long-range and hunting scopes.
• Mount height is medium at 1.11 inch from the top of the receiver to the centerline of the scope tube, a figure to match against your objective bell.
• The finish is black, a low-glare look that suits most blued and synthetic rifles.
• It is a one-piece unit with the base and rings machined together, so the rings stay aligned with each other.
• The maker lists the mount for right-hand firearms, so confirm the hand of your rifle before ordering.
• Base screws are 6-48 x 1/4 inch and take a 7/64-inch Allen wrench, so check what your receiver is drilled and tapped for.
• Hole-to-hole spacing is .86, 4.48 and .60 inch, the pattern to compare against your receiver before ordering.
• The tactical rings are .80 inch wide with four screws per ring, giving a wider clamp on the scope tube.
• The base carries a 20 MOA taper, tapered down at the front to give extra elevation for long-range shooting; the maker says the front ring sits about .03 inch lower than on a standard mount.

Frequently Asked Questions

Which rifles does this mount fit? It is listed by the maker for Remington 700 long action rifles. Compare your receiver’s hole spacing and base screw size with the specifications above before ordering.

What scope tube size and height does this mount use? The rings fit a 30mm scope tube at medium height, which puts the tube at 1.11 inch from the receiver top to the scope centerline.

What does the 20 MOA taper do? The 20 MOA base is tapered down at the front for long-range shooting, giving more elevation travel. The maker notes the front ring sits about .03 inch lower than a standard mount.

Buy the DNZ Game Reaper Tactical Remington 700 Long Action 20 MOA 30mm Medium Scope Mount, Black

A mount that lines up with your receiver holes saves a lot of trial and error at the bench. Get it from our Lubbock, Texas gun shop with fast, insured shipping, and see our other scope accessories and parts as well.