Description
The Faxon AR-10 bolt (brand part no. FF308BCNITRIDE) is a drop-in DPMS Gen 1 pattern bolt for .308 Winchester, 6.5 Creedmoor and 8.6 Blackout AR-10 rifles. It is machined from 9310 steel, given a full mil-spec heat treat, shot peened and magnetic particle inspected, with the back of the lugs chamfered for smoother unlocking. Faxon Firearms adds an S7 extractor with .308-spec springs and a dual O-ring, then finishes the bolt in salt bath nitride. The firing pin is included, which makes it a straightforward replacement or spare for a worn bolt.
Key Specifications
- The bolt is built for .308 Winchester, 6.5 Creedmoor and 8.6 Blackout DPMS Gen 1 pattern AR-10 rifles.
- The bolt face is .125, the face depth these three cartridges share.
- The material is 9310 steel, which Faxon rates as tougher than standard Carpenter 158.
- The heat treat is a full mil-spec treatment with shot peening, which hardens the lugs for repeated high-pressure cycles.
- Each bolt is magnetic particle inspected, a non-destructive check that finds cracks and inclusions before it ships.
- The extractor is S7 tool steel with .308-spec springs and a dual O-ring, which keeps extraction tension consistent.
- The finish is salt bath nitride, a hard, slick surface that cleans up faster than phosphate.
- The firing pin is included, so the bolt assembly is ready to install in a standard DPMS Gen 1 pattern carrier.
Frequently Asked Questions
Which AR-10 pattern does this bolt fit? Faxon lists it for DPMS Gen 1 pattern AR-10 and LR-308 rifles, with a standard DPMS Gen 1 pattern carrier.
Do I need to check headspace? Yes. Headspace is set between the bolt and the barrel extension, so Faxon says a new bolt must be checked with go and no-go gauges before firing unless Faxon headspaced it to your barrel.
Does it include the firing pin? Yes. The bolt assembly and the firing pin are both included.
Buy the Faxon Firearms AR-10 Bolt for .308 Win, 6.5 Creedmoor and 8.6 BLK, Salt Bath Nitride
Keep a spare or replace a worn bolt with a nitrided 9310 part that is magnetic particle inspected. Browse more AR-10 bolts and order from our Lubbock, Texas gun shop for fast shipping.
Additional Information
| UPC | 816341020900 |
|---|---|
| Manufacturer | FAXON FIREARMS |
| Manufacturer Part Number | FF308BCNITRIDE |







