The Talley Remington 700 20 MOA 1-inch low scope mount for short actions (brand part number 930700SM) is a one-piece ring-and-base mount made by Talley Manufacturing for Remington 700 rifles, including the 721, 722, 725 and 40X models, sized for 1-inch scope tubes at low height. Because the rings and base are a single unit, there is no joint between them to work loose or sit out of alignment. Talley builds 20 MOA into the rings and machines the mount from lightweight aircraft-grade aluminum, with no lapping required. At low height the rear measures 0.550-inch and the front 0.412-inch, from the top of the receiver to the bottom of the scope tube, and Talley lists the weight at 2.2 oz per set. The mount is sold in pairs.

Key Specifications

• The mount is designed to fit Remington 700 rifles, including the 721, 722, 725 and 40X models, the rifles this version is made for.
• 20 MOA is built into the rings, adding elevation for longer distances.
• The ring size is 1-Inch, matched to 1-inch scope main tubes.
• The ring height is Low, which sets how far the scope sits above the receiver.
• The rear height is 0.550-inch, measured from the top of the receiver to the bottom of the scope tube.
• The front height is 0.412-inch, measured the same way at the front mounting location.
• Talley lists the weight at 2.2 oz per set, light for a mount that carries the scope and rings in one piece.

Frequently Asked Questions

Which rifles does this mount fit? It is designed for Remington 700 rifles, including the 721, 722, 725 and 40X models. This version is the short action variation, and the front height differs slightly between short and long actions.

How is the ring height measured? Height is measured from the top of the action or receiver to the bottom of the scope tube at the respective mounting location. This low version measures 0.550-inch at the rear and 0.412-inch at the front.

Do these rings need lapping? No. The ring and base are machined as one piece to tight tolerances, so no lapping is required and the mount is ready to install.

Buy the Talley Remington 700 20 MOA Scope Mount, 1-Inch Low, Short Action

This Talley 1-inch low mount is made in America and ready to install. Order it from our scope accessories lineup in Lubbock, Texas for fast, insured shipping.