The Talley Remington 700 20 MOA 1-inch low scope mount for long actions (brand part number 930700LM) is a one-piece ring-and-base mount made by Talley Manufacturing for Remington 700 rifles, including the 721, 722, 725 and 40X models, sized for 1-inch scope tubes at low height. Ring and base are machined as one piece, which removes the out-of-alignment and loose-connection problems of a traditional two-piece design. Talley builds 20 MOA into the rings and machines the mount from lightweight aircraft-grade aluminum, with no lapping required. At low height the rear measures 0.550-inch and the front 0.406-inch, from the top of the receiver to the bottom of the scope tube, and Talley lists the weight at 2.2 oz per set. The mount is sold in pairs.

Key Specifications

• The mount is designed to fit Remington 700 rifles, including the 721, 722, 725 and 40X models, the rifles this version is made for.
• 20 MOA is built into the rings, adding elevation for longer distances.
• The ring size is 1-Inch, matched to 1-inch scope main tubes.
• The ring height is Low, which sets how far the scope sits above the receiver.
• The rear height is 0.550-inch, measured from the top of the receiver to the bottom of the scope tube.
• The front height is 0.406-inch, measured the same way at the front mounting location.
• Talley lists the weight at 2.2 oz per set, light for a mount that carries the scope and rings in one piece.
• The hole spacing is 0.862-inch front and 0.605-inch rear, center to center.
• The mount ships with mounting screws (6-48) and a T-15 wrench, so it is ready to install.
• The design is a one-piece ring and base of CNC-machined aircraft-grade aluminum, sold in pairs.

Frequently Asked Questions

What is the hole spacing? Talley lists the hole spacing at 0.862-inch front and 0.605-inch rear, center to center.

Which rifles does this mount fit? It is designed for Remington 700 rifles, including the 721, 722, 725 and 40X models. This version is the long action variation, and the front height differs slightly between short and long actions.

How is the ring height measured? Height is measured from the top of the action or receiver to the bottom of the scope tube at the respective mounting location. This low version measures 0.550-inch at the rear and 0.406-inch at the front.

Buy the Talley Remington 700 20 MOA Scope Mount, 1-Inch Low, Long Action

Put a solid scope platform on your rifle with this Talley mount. Browse more scope accessories at our Lubbock, Texas gun shop for fast, insured shipping.