Hornady’s Unprimed Brass 6mm Remington Rifle Cases (brand part no. 8622) is a box of 50 unprimed cases built from high-quality brass for consistent charges and pressures. Hornady holds wall thickness, weight, and internal capacity to tight, uniform tolerances, then runs every case through a pressure calibration test to confirm even expansion when fired. That uniformity is what lets the bullet seat properly, both in the case neck and in the chamber, so a batch of these cases behaves the same round after round.

Key Specifications

• Chambered for 6mm Remington.
• Sold unprimed, confirmed by Hornady’s own listing (Unprimed: Yes, Primed: No).
• Packaged 50 cases per box, with 5 boxes to a case for bulk orders.
• Made from high-quality brass chosen specifically for consistent charges and pressures.
• Held to uniform wall thickness, weight, and internal capacity across the batch.
• Every case passes a pressure calibration test to confirm uniform expansion when fired.
• Case dimensions allow proper bullet seating in both the case neck and the chamber.
• Cases are new manufacture, not reprocessed or once-fired brass.
• As with any new brass, verify case length and headspace against your own chamber before the first firing.

Frequently Asked Questions

Are these cases primed? No, they’re unprimed; you’ll supply your own primers to match your load.

How many cases are in a box, and how many boxes per case? Each box holds 50 cases, and 5 boxes ship per case for bulk buyers.

What makes Hornady brass consistent from case to case? Tight control over wall thickness, weight, and internal capacity, backed by a pressure calibration test on every case, is what keeps charges and pressures repeatable.

Buy the Hornady Unprimed Brass 6mm Remington Rifle Cases (50ct)

Order the Hornady Unprimed Brass 6mm Remington Rifle Cases (50ct) from our Lubbock, Texas gun shop for fast, reliable shipping. Find it in Hornady‘s reloading brass lineup and pair it with the primers, powder, and bullets you need for a full 6mm Remington reload.