The EGW Savage Mark II (Also 93) Picatinny Scope Base (brand part number 41500) mounts a Picatinny-pattern rail directly to a Savage Mark II (Also 93) receiver, built to a 0 MOA incline. Evolution Gun Works machines the base from 6061-T6 extruded aluminum and finishes it in matte black for a durable, corrosion-resistant mount, running 5.882 inches overall with a 3.345-inch center spread between the two middle mounting holes. The base ships with hex-head screws and a wrench for installation, and EGW recommends 20 inch-lbs of torque with a drip of blue Loctite on the screws. It’s made in the USA to EGW’s standard tolerances.

Key Specifications

• Machined from 6061-T6 extruded aluminum for a strong, corrosion-resistant base.
• Finished in matte black to match most bolt-action rifle builds.
• Built specifically for the Savage Mark II (Also 93) receiver.
• Set at 0 MOA to the mounted rail.
• Runs 5.882 inches overall in length.
• Spaces the two middle mounting holes at a 3.345-inch center spread.
• Mounts with hex-head screws and a wrench included.
• EGW recommends 20 inch-lbs of torque with a drip of blue Loctite during installation.
• Requires Mil-Std 1913 Picatinny-pattern rings, sold separately.
• Sold as the base only, with no mounting rings included.

Frequently Asked Questions

What rifle does this base fit? The Savage Mark II (Also 93), and no other action.

Are scope rings included? No, this is the base only; you’ll need a separate set of Picatinny-pattern rings.

What does 0 MOA mean for my setup? At 0 MOA, the base sits level with the bore for typical hunting ranges.

Buy the EGW Savage Mark II (Also 93) Picatinny Scope Base, 0 MOA

Get a precisely fit, recoil-rated base for your Savage Mark II (Also 93). Order it from our Evolution Gun Works lineup, part of our scope accessories selection, at our Lubbock, Texas gun shop for fast, direct shipping.