The Weaver Sure-Grip Windage Adjustable Scope Rings, 1-Inch Extra High from Weaver (Weaver part no. 49145) hold a 1-inch riflescope tube in the Extra High height. Weaver builds the Sure Grip series around a four-screw system with a steel cap, and this version adds a windage adjustment so you can correct horizontal zero at the mount itself. The rings are aluminum and steel with a matte finish and are made in the USA. That suits a hunting rifle where the base alone leaves the scope off in windage, and the Extra High height sets how much clearance the objective bell gets. Choose the height that clears your scope, tighten to the maker torque figures, and the set holds through recoil.

Key Specifications

• The rings are sized for a 1-inch scope tube, the common riflescope diameter.
• Ring height is Extra High, which sets how high the scope sits and how much clearance the objective bell gets.
• The finish is matte, which cuts glare on the mount.
• Construction is aluminum and steel, the materials Weaver lists for this ring series.
• The clamp is a four-screw system with a steel cap, spreading holding force around the scope tube.
• The rings are windage adjustable, so horizontal zero can be fine-tuned at the mount instead of at the scope.
• The set is made in the USA by Weaver.
• Weaver recommends 15 in-lbs on the cap screws, a figure that keeps the rings snug without over-tightening on the scope tube.
• Weaver recommends 35 in-lbs on the crossbolt, the setting the maker specifies for the lock to the base.

Frequently Asked Questions

Which scope tube size do these Extra High rings fit? They are made for a 1-inch riflescope tube. Choose the height by the clearance your objective bell needs over the barrel and base.

What does the windage adjustment do? It lets you fine-tune horizontal zero at the mount, which helps when the base alone cannot fully correct windage.

What torque should I use on the screws? Weaver recommends 15 in-lbs on the cap screws and 35 in-lbs on the crossbolt.

Buy the Weaver Sure-Grip Windage Adjustable Scope Rings, 1-Inch Extra High

Windage correction at the mount can rescue a scope that is out of range of its own turrets. Order the Weaver Sure-Grip Windage Adjustable Scope Rings, 1-Inch Extra High from our Lubbock, Texas gun shop for fast, direct shipping. Browse more scope rings to match the height to your scope.